SAE International - AS4660B
NUT, SHORT FLARELESS
active
Buy Now
| Organization: | SAE International |
| Publication Date: | 4 January 2013 |
| Status: | active |
Document History
AS4660B
January 4, 2013
NUT, SHORT FLARELESS
A description is not available for this item.
References
This document references:
AMS2486 - CONVERSION COATING OF TITANIUM ALLOYS Fluoride - Phosphate Type
Published by SAE International
on
May 1, 1973
This specification establishes the engineering requirements for producing chemical conversion coatings on titanium-base alloys and the properties of such coatings.
This document references:
AMS2700 - Passivation of Corrosion Resistant Steels
Published by SAE International
on
March 1, 2000
This specification defines the engineering requirements for a process to assure removal of free iron or other less noble contaminants from the surfaces of corrosion resistant steel parts.
This document references:
AMS2759/3 - Heat Treatment, Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
Published by SAE International
on
August 10, 2011
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for heat treatment of precipitation-hardening corrosion-...
This document references:
AMS4124 - ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T7351) Stress-Relief Stretched
Published by SAE International
on
April 1, 1967
A description is not available for this item.
This document references:
AMS4928 - TITANIUM ALLOY 6Al - 4V Annealed - 120,000 psi Yield
Published by SAE International
on
July 1, 1957
A description is not available for this item.
This document references:
AMS5659 - STEEL BARS, FORGINGS AND RINGS, CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
Published by SAE International
on
September 1, 1965
A description is not available for this item.
This document references:
AMSQQP416 - Plating, Cadmium (Electrodeposited)
Published by SAE International
on
July 1, 2000
This specification covers the requirements for electrodeposited cadmium plating.
This document references:
ARP4296 - DRAWING INTERPRETATIONS, STANDARD MACHINING PRACTICE, TUBE FITTINGS AND CONNECTORS, FLUID SYSTEMS
Published by SAE International
on
April 1, 1994
This SAE Aerospace Recommended Practice (ARP) is intended to interpret and clarify engineering drawing requirements relating to the manufacture and inspection of fluid tube fittings and connectors....
This document references:
AS18280 - Fittings, Flareless Tube, Fluid Connection
Published by SAE International
on
March 1, 1999
This specification establishes the requirements for flareless tube connection fittings, nuts and sleeves for use in fluid systems (see 6.1 ).
This document references:
AS478 - IDENTIFICATION MARKING OF ITEMS FOR AIRCRAFT POWER PLANTS
Published by SAE International
on
May 15, 1960
This standard covers permanent marking intended to be easily and accurately read during the normal service life of the item and also covers temporary marking intended to provide legible...