DIN 16960-1
Welding of Thermoplastics; Principles
inactive
Buy Now
Organization: | DIN |
Publication Date: | 1 February 1974 |
Status: | inactive |
Page Count: | 12 |
ICS Code (Welding processes): | 25.160.10 |
Document History
DIN 16960-1
February 1, 1974
Welding of Thermoplastics; Principles
A description is not available for this item.
References
This document is referenced by:
DVS 2205-1 - Calculation of tanks and apparatus made of thermoplastics - Characteristic values
Published by DIN
on
January 1, 2015
This guideline provides processors of semi-finished products made of thermoplastic materials with instructions on how to determine characteristic values as the basis for the calculations involved in...
This document is referenced by:
DVS 2218-1 - Welding of thermoplastics in series fabrication - Rotational friction welding - Installations, procedures and characteristics
Published by DIN
on
June 1, 2010
Scope of application This technical code applies to the joining of mouldings and semifinished products made of thermoplastics by means of rotational friction welding.
This document is referenced by:
DVS 2225-3 - Welding of lining membranes made of polyethylene (PE) for the protection of groundwater
Published by DIN
on
October 1, 2019
A description is not available for this item.
This document is referenced by:
DVS 2207-4 - Welding thermoplastic materials - Hot-gas extrusion welding of pipes, piping parts, fittings and panels - Welding of fluoroplastics
Published by DIN
on
December 1, 2019
A description is not available for this item.
This document is referenced by:
DVS 2210-1 - Industrial piping made of thermoplastics - Design and execution - Above-ground pipe systems - Calculation example
Published by DIN
on
April 1, 2003
Scope of application The DVS 2210-1 technical code includes fundamentals for the design, calculation, prefabrication and assembly of industrial piping made of thermoplastics and laid above ground....
This document is referenced by:
DVS 2215-1 - Heated tool welding of mouldings made of thermoplastics in series fabrication
Published by DIN
on
September 1, 2010
Scope of application This technical code applies not only to the heated tool welding of mouldings with each other but also to combinations of mouldings and semi-finished products, on this subject see...
This document is referenced by:
DVS 2207-3 - Welding thermoplastic materials - Hot-gas string-bead welding, hot-gas welding withtorch separate from filler rod - Requirements for the welding equipment and accessories
Published by DIN
on
December 1, 2019
A description is not available for this item.
This document is referenced by:
DVS 2215-3 - Hot plate welding of mouldings made from amorphous thermoplastics in volume production
Published by DIN
on
April 1, 1999
Scope of application This technical code applies not only to the heated tool welding of mouldings with each other but also to combinations of mouldings and semi-finished products, on this subject see...