This document references:
ACI 223R - Guide for the Use of Shrinkage-Compensating Concrete
Published by ACI
on
December 1, 2010
Recommendations of this guide include proportioning, mixing, placing, finishing, curing, and testing. Shrinkagecompensating concrete is produced using expansive cements or expansive component...
This document references:
ACI 224.3R - Joints in Concrete Construction
Published by ACI
on
January 31, 2008
Objectives and scope This report reviews joint practices in concrete structures subjected to a wide variety of uses and environmental conditions. Design, construction, and maintenance of joints are...
This document references:
ACI 224R - Control of Cracking in Concrete Structures
Published by ACI
on
March 24, 2008
Cracks in concrete structures can indicate major structural problems and detract from the appearance of monolithic construction. There are many specific causes of cracking. This report presents the...
This document references:
ACI 302.1R - Guide to Concrete Floor and Slab Construction
Published by ACI
on
June 1, 2015
This guide emphasizes choosing and proportioning of materials, design details, proper construction methods, and workmanship. Slabs specifically intended for the containment of liquids are beyond the...
This document is referenced by:
UFC FC 4-722-01N - NAVY AND MARINE CORPS DINING FACILITIES
Published by DOD
on
December 1, 2013
This FC (Facilities Criteria) presents facility operation, programming, and sustainability information to guide the design and construction criteria for all Navy and Marine Corps enlisted dining...
This document is referenced by:
UFC FC 4-721-02F - AIR FORCE LEVEL I CONFINEMENT FACILITY
Published by DOD
on
April 1, 2015
Purpose This standard facility prototype design was developed to assist Air Force programmers in preparing and validating DD Form 1391 requirements and to assist architect-engineer (A-E) design...
This document is referenced by:
UFC FC 4-179-03F - AIR FORCE INDOOR SMALL ARMS FIRING RANGE
Published by UFC
on
April 1, 2015
Purpose. This standard facility prototype design criteria was developed to assist Air Force programmers to prepare and validate DD Form 1391 requirements and to assist A-E design professionals with...