PURPOSE. This document sets standards for facility accessibility by physically handicapped persons for Federal and federally-funded facilities. These standards are to be applied during the design, construction, and alteration of buildings and facilities to the extent required by the...
This Standard applies to the construction and performance of new propane fuel system components that provide motive power to highway vehicles with internal combustion engines. This Standard does not apply to stationary or non-highway applications. This Standard does not apply to propane fuel...
This SAE Standard covers general and dimensional specifications for brass bodied reusable Push to Connect tube fittings for use in the piping of vehicular air brake systems. This type of fitting is intended for use with nylon tubing per SAE J844. See SAE J2494-3 for the Performance Requirements of...
This code shall apply to the design, installation, operation, and maintenance of compressed natural gas (CNG) and liquefied natural gas (LNG) engine fuel systems on vehicles of all types and for fueling vehicle (dispensing) systems and associated storage, including the following: (1)...
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. To determine whether a vehicle's seat belt system meets the functional operation and...
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. The purpose of this test procedure is to determine if the seat anchorages, seat...
PURPOSE. This directive: a. Reissues DoD Directive 5030.19 (Reference (a)). b. Establishes DoD policy and assigns responsibilities under the statutory authorities, Executive orders, and policies relating to Federal Aviation matters cited in Enclosure 2. c. Designates the Under Secretary of...
PURPOSE. This directive: a. Reissues DoD Directive 5030.19 (Reference (a)). b. Establishes DoD policy and assigns responsibilities under the statutory authorities, Executive orders, and policies relating to Federal Aviation matters cited in Enclosure 2. c. Designates the Under Secretary of...
This SAE Recommended Practice establishes limits for electrical circuits on motor vehicle safety glazing materials.
This specification covers new commercially produced electrically propelled, four-wheeled, two front or rear wheel driven (4×2) light trucks, in the 1/4 to 1-1/2 ton payload range. All vehicles covered by this specification must meet all applicable Federal Motor Vehicle...
This standard establishes requirements for equipment, configuration, and performance of Multipurpose Off-Highway Utility Vehicles (MOHUVs). A MOHUV has features specifically intended for utility use and has the following characteristics: 1) intended to transport a person(s) and/or cargo,...
This specification covers non-reinforced flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems conforming to the requirements of Federal Motor Vehicle Safety Standard (FMVSS 104) and SAE J942. Material Description. Materials...