Nickel (with copper undercoat if required), with or without chromium topcoat, electrodeposited on steel (or iron), zinc alloy, copper or copper alloys, aluminium or alloys. Appearance, type, thickness of nickel and chromium, adhesion, corrosion resistance.
1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wires, sponge and powdered metals. 1.1.1 This practice is also suitable for preparation of solid...
1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wires, and sponge. Powdered metals need to be compacted before melting. 1.1.1 This practice is also...
1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wires, and sponge. Powdered metals need to be compacted before melting. 1.1.1 This practice is also...
5.1 Refer to Guide E844 for the selection, irradiation, and quality control of neutron dosimeters. 5.2 Refer to Practice E261 for a general discussion of the determination of fast-neutron fluence rate with threshold detectors. 5.3 Pure nickel in the form of foil or wire is readily...
This European Standard covers the grades of wrought steels and nickel alloys which are usually employed for products, for which the main requirement is their resistance to the effects of hot gases and products of combustion at temperatures above 550°C.
1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of drillings, chunks, chips, turnings, wire, sponge, powder briquettes, and powdered metals. 1.1.1 This practice is...
1.1 This practice incorporates etching and metallographic examination of Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys such as, but not limited to, UNS N06686 and UNS N10276. 1.2 Microstructures have a strong influence on properties and successful application of metals and alloys....
5.1 Refer to Guide E844 for the selection, irradiation, and quality control of neutron dosimeters. 5.2 Refer to Practice E261 for a general discussion of the determination of fast-neutron fluence rate with threshold detectors. 5.3 Pure nickel in the form of foil or wire is readily...
This specification covers the requirements for compacted, mineral-insulated, metal-sheathed (MIMS) cables used to manufacture metal-sheathed, industrial resistance thermometers referred to in this document as Resistance Temperature Detectors or RTDs. The materials of construction include copper,...
1.1 This specification covers the requirements for compacted, mineral-insulated, metal-sheathed (MIMS) cables used to manufacture metal-sheathed, industrial resistance thermometers referred to in this document as Resistance Temperature Detectors or RTDs. 1.2 The materials of construction include...
Refer to Guide E 844 for the selection, irradiation, and quality control of neutron dosimeters. Refer to Practice E 261 for a general discussion of the determination of fast-neutron fluence rate with threshold detectors. Pure nickel in the form of foil or wire is readily available,...
1.1 This practice incorporates etching and metallographic examination of Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys such as, but not limited to, UNS N06686 and UNS N10276. 1.2 Microstructures have a strong influence on properties and successful application of metals and alloys....
1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in high-strength copper-base, nickel-copper, and related alloy castings. The reference radiograph films are an adjunct to this document and must be purchased separately from...
This document specifies a flame atomic absorption spectrometric method (FAAS) for the determination of nickel content in steels and cast irons. The method is applicable to nickel contents between 0,004 % (weight percent) and 2,0 % (weight percent). The method can be adapted to lower...
Specifies appearance, type and thickness of nickel, type and thickness of chromium, thermal cycling and corrosion resistance tests for various service conditions.
1.1 This specification covers the requirements for compacted, mineral-insulated, metal-sheathed (MIMS) cables used to manufacture metal-sheathed, industrial resistance thermometers referred to in this document as Resistance Temperature Detectors or RTDs. 1.2 The materials of construction include...
This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wires, sponge and powdered metals. This practice is also suitable for preparation of solid samples of...
1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in high-strength copper-base, nickel-copper, and related alloy castings. The reference radiograph films are an adjunct to this document and must be purchased separately from...
1.1 This practice incorporates etching and metallographic examination of Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys such as, but not limited to, UNS N06686 and UNS N10276. 1.2 Microstructures have a strong influence on properties and successful application of metals and alloys....