loading
ASTM F3168-23 - Standard Practice for Hayride Attractions
March 15, 2023 - ASTM International

1.1 This practice applies to hayride attractions used primarily in amusement, entertainment, recreational or agritourism applications. Such applications include but are not limited to family entertainment centers, camps, shopping centers, malls, seasonal attractions, pumpkin patches, corn mazes,...

ASTM E1891-21 - Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
October 1, 2021 - ASTM International

1.1 This guide covers the methods for determining the death rate kinetics expressed as D-values. These values can be derived from the construction of a kill curve (or survivor curve) or by using other procedures for determining the number of survivors after exposure to antimicrobial chemicals or...

DS/CEN ISO/TS 22756 - Health Informatics – Requirements for a knowledge base for clinical decision support systems to be used in medication-related processes (ISO/TS 22756:2020)
October 5, 2020 - DS

This document specifies the requirements for developing a knowledge base for drug-related problems that cohere with the intended drug use, to be used in rule-based clinical decision support systems (CDSS), such as the criteria for selecting a raw data source and the quality criteria for the...

DS/ISO/TS 22756 - Health Informatics – Requirements for a knowledge base for clinical decision support systems to be used in medication-related processes
October 5, 2020 - DS

This document specifies the requirements for developing a knowledge base for drug-related problems that cohere with the intended drug use, to be used in rule-based clinical decision support systems (CDSS), such as the criteria for selecting a raw data source and the quality criteria for the...

IEC 63240-1 - Active assisted living (AAL) reference architecture and architecture model – Part 1: Reference architecture IEC
November 1, 2020 - IEC

This document specifies the AAL reference architecture. This document defines concepts and introduces terminology. It provides generic rules for designers of AAL systems and services with the aim to facilitate systems design and enable interoperability between components. This document...

ISO TS 22756 - Health Informatics — Requirements for a knowledge base for clinical decision support systems to be used in medication-related processes
September 1, 2020 - ISO

This document specifies the requirements for developing a knowledge base for drug-related problems that cohere with the intended drug use, to be used in rule-based clinical decision support systems (CDSS), such as the criteria for selecting a raw data source and the quality criteria for the...

IEC 63240-2 - Active assisted living (AAL) reference architecture and architecture model – Part 2: Architecture model
November 1, 2020 - IEC

This document specifies the AAL architecture model. This document defines concepts and introduces terminology. IEC 63240-1 provides generic rules for designers of AAL systems and services with the aim to facilitate systems design and enable interoperability between components. This document...

ASTM F3168-20a - Standard Practice for Hayride Attractions
December 1, 2020 - ASTM International

1.1 This practice applies to hayride attractions used primarily in amusement, entertainment, recreational or agritourism applications. Such applications include but are not limited to family entertainment centers, camps, shopping centers, malls, seasonal attractions, pumpkin patches, corn mazes,...

DS/EN 81-40 - Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
September 22, 2020 - DS

1.1 This document deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically operated stairlifts (chair, standing platform and wheelchair platform) affixed to a building structure, moving in an inclined plane and intended for use by...

ASTM D5465-16(2020) - Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
July 1, 2020 - ASTM International

4.1 Numerous ASTM test methods and practices (for example: Test Methods D5259 and D5392, and Practices D6974 and E2563) report colony counts as their measured parameter. 4.2 These practices provide a uniform set of counting, calculating, and reporting procedures for ASTM test methods in...

ISO 22894 - Traditional Chinese medicine — Pulse waveform format
March 1, 2020 - ISO

This document specifies the application, in the context of traditional Chinese medicine practice, of medical waveform format encoding rules (MFER) to pulse condition waveform as measured in physiological laboratories, hospitals, bed-wards, pharmacies, clinics, community health centres and...

ASTM F3168-20 - Standard Practice for Hayride Attractions
April 1, 2020 - ASTM International

1.1 This practice applies to hayride attractions used primarily in amusement, entertainment, recreational or agritourism applications. Such applications include but are not limited to family entertainment centers, camps, shopping centers, malls, seasonal attractions, pumpkin patches, corn mazes,...

DS/ISO/TS 22077-4 - Health informatics – Medical waveform format – Part 4: Stress test electrocardiography
October 22, 2019 - DS

This document defines the application of Medical waveform Format Encoding Rules (MFER) to describe stress test electrocardiography, which is one of the outputs of exercise, pharmacological and cardiopulmonary stress test. MFER performed in physiological laboratories, healthcare clinics, etc....

ISO TS 22077-4 - Health informatics — Medical waveform format — Part 4: Stress test electrocardiography
October 1, 2019 - ISO

This document defines the application of Medical waveform Format Encoding Rules (MFER) to describe stress test electrocardiography, which is one of the outputs of exercise, pharmacological and cardiopulmonary stress test. MFER performed in physiological laboratories, healthcare clinics, etc....

ASTM F3168-19 - Standard Practice for Hayride Attractions
November 1, 2019 - ASTM International

1.1 This practice applies to hayride attractions used primarily in amusement, entertainment, recreational or agritourism applications. Such applications include but are not limited to family entertainment centers, camps, shopping centers, malls, seasonal attractions, pumpkin patches, corn mazes,...

Advertisement