loading
ASTM F1646 - Standard Terminology Relating to Walkway Safety and Footwear
May 15, 2016 - ASTM

The terminology standard covers terminology related to walkway safety and footwear. Words adequately defined in standard dictionaries are not included. Included are words that are particular to this industry and those contained in standards under the jurisdiction of ASTM Committee F13...

ASTM F1646-16 - Standard Terminology Relating to Walkway Safety and Footwear
May 15, 2016 - ASTM International

1.1 The terminology standard covers terminology related to walkway safety and footwear. 1.2 Words adequately defined in standard dictionaries are not included. Included are words that are particular to this industry and those contained in standards under the jurisdiction of ASTM...

ASTM 15.07 - Sports Equipment, Playing Surfaces and Facilities; Pedestrian/Walkway Safety and Footwear; Amusement Rides and Devices; Snow Skiing
November 1, 2020 - ASTM

Abstract: Volume 15.07 covers: Sports Equipment and Facilities-standards cover items such as headgear and helmets, eye protectors, paintball, and playground surfacing. These include baseball helmet and bicycle helmet tests not found in ANSI or SNELL standards. Pedestrian/Walkway...

ASTM F3132-20 - Standard Practice for Selection of Walkway Surfaces When Considering Pedestrian Safety
October 1, 2020 - ASTM International

1.1 This practice outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. It is intended for use by those involved in decisions regarding selection of interior and exterior slip resistant walkway surfaces under expected use conditions....

ASTM F2948-21 - Standard Guide to Walkway Auditor Qualifications
April 1, 2021 - ASTM International

4.1 Characterizing the safety of a pedestrian walkway is a significant task, whether as a proactive effort or in response to an incident. In addition to experience, the qualifications for a walkway auditor should include reasonable familiarity with guiding documents, sources...

ASTM F2948-20 - Standard Guide to Walkway Auditor Qualifications
December 1, 2020 - ASTM International

4.1 Characterizing the safety of a pedestrian walkway is a significant task, whether as a proactive effort or in response to an incident. In addition to experience, the qualifications for a walkway auditor should include reasonable familiarity with guiding documents, sources...

ASTM F2948-13 - Standard Guide to Walkway Auditor Qualifications
April 1, 2013 - ASTM International

4.1 Characterizing the safety of a pedestrian walkway is a significant task, whether as a proactive effort or in response to an incident. In addition to experience, the qualifications for a walkway auditor should include reasonable familiarity with guiding documents, sources...

DS/EN 13281 - Inland navigation vessels - Safety requirements for walkways and working places
August 30, 2000 - DS

This European Standard specifies the safety requirements for walkways and working places on inland navigation vessels in the areas used for work.

ASTM F3132 - Standard Practice for Selection of Walkway Surfaces When Considering Pedestrian Safety
October 1, 2020 - ASTM

This practice outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. It is intended for use by those involved in decisions regarding selection of interior and exterior slip resistant walkway surfaces under expected use conditions....

ASTM F2948 - Standard Guide to Walkway Auditor Qualifications
December 1, 2020 - ASTM

This guide outlines basic knowledge topics that walkway auditors should consider (where applicable) when conducting audits of pedestrian walkways. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of...

ASTM F2966-13 - Standard Guide for Snow and Ice Control for Walkway Surfaces
July 1, 2013 - ASTM International

1.1 This guide covers snow and ice control procedures. It is intended to recommend known methods to bring about reasonably safe walkways where snow and ice may impact the safety of pedestrians. 1.2 Conformance with this guide will not alleviate all snow and ice hazards; however,...

ASTM F2966-19 - Standard Guide for Snow and Ice Control for Walkway Surfaces
December 1, 2019 - ASTM International

1.1 This guide covers snow and ice control procedures. It is intended to recommend known methods to bring about reasonably safe walkways where snow and ice may impact the safety of pedestrians. 1.2 Conformance with this guide will not alleviate all snow and ice hazards; however,...

ASTM F2508-16 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
July 1, 2016 - ASTM International

1.1 This practice is intended to establish the procedures for validation, calibration, and certification of walkway tribometers. 1.2 This practice provides a walkway tribometer supplier with a procedure and suite of reference surfaces to validate his walkway tribometer by...

ASTM F2508-15 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
May 1, 2015 - ASTM International

1.1 This practice is intended to establish the procedures for validation, calibration, and certification of walkway tribometers. 1.2 This practice provides a walkway tribometer supplier with a procedure and suite of reference surfaces to validate his walkway tribometer by...

ASTM F2508-13 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
April 1, 2013 - ASTM International

1.1 This practice is intended to establish the procedures for validation, calibration, and certification of walkway tribometers. 1.2 This practice provides a walkway tribometer supplier with a procedure and suite of reference surfaces to validate his walkway tribometer by...

ASTM F2508-12a - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
November 1, 2012 - ASTM International

1.1 This practice is intended to establish the procedures for validation, calibration, and certification of walkway tribometers. 1.2 This practice provides a walkway tribometer supplier with a procedure and suite of reference surfaces to validate his walkway tribometer by...

ASTM F2508-12 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
October 15, 2012 - ASTM International

1.1 This practice is intended to establish the procedures for validation, calibration, and certification of walkway tribometers. 1.2 This practice provides a walkway tribometer supplier with a procedure and suite of reference surfaces to validate his walkway tribometer by...

Advertisement