UNLIMITED FREE
ACCESS TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Select Your Free Newsletters

Industry Newsletters

Select Your Free Product Alerts

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

IETF RFC 2545

Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing

active, Most Current
Buy Now
Organization: IETF
Publication Date: 1 March 1999
Status: active
Page Count: 5

Document History

IETF RFC 2545
March 1, 1999
Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing
A description is not available for this item.

References

This document is referenced by:
IETF RFC 4798 - Connecting IPv6 Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE)
Published by IETF on February 1, 2007
This document explains how to interconnect IPv6 islands over a Multiprotocol Label Switching (MPLS)-enabled IPv4 cloud. This approach relies on IPv6 Provider Edge routers (6PE), which are Dual Stack...
This document is referenced by:
EUROCAE ED 138 - NETWORK REQUIREMENTS AND PERFORMANCES FOR VOICE OVER INTERNET PROTOCOL (VOIP) AIR TRAFFIC MANAGEMENT (ATM) SYSTEMS - PART 1: NETWORK SPECIFICATION; PART 2: NETWORK DESIGN GUIDELINE
Published by EUROCAE on February 1, 2009
INTRODUCTION BACKGROUND Components of Ground- Ground ATM voice systems has used digital (TDM/PCM - Time Division Multiplexing / Pulsed Code Modulation) or analogue technology during a long time....
This document is referenced by:
IETF RFC 7752 - North-Bound Distribution of Link-State and Traffic Engineering (TE) Information Using BGP
Published by IETF on March 1, 2016
In a number of environments, a component external to a network is called upon to perform computations based on the network topology and current state of the connections within the network, including...
This document is referenced by:
EUROCAE ED 262 - TECHNICAL STANDARD OF AVIATION PROFILES FOR INTERNET PROTOCOL SUITE
Published by EUROCAE on September 1, 2019
PURPOSE AND SCOPE INTRODUCTION This document contains the technical Profiles of the Internet Engineering Task Force (IETF) Request for Comments (RFC) series of documents addressing relevant...
This document is referenced by:
RTCA DO-379 - Internet Protocol Suite Profiles
Published by RTCA on September 16, 2019
PURPOSE AND SCOPE Introduction This document contains the technical Profiles of the Internet Engineering Task Force (IETF) Request for Comments (RFC) series of documents addressing relevant...
This document is referenced by:
IETF RFC 8950 - Advertising IPv4 Network Layer Reachability Information (NLRI) with an IPv6 Next Hop
Published by IETF on November 1, 2020
Abstract Multiprotocol BGP (MP-BGP) specifies that the set of usable next-hop address families is determined by the Address Family Identifier (AFI) and the Subsequent Address Family Identifier...
This document is referenced by:
RFC 9252 - BGP Overlay Services Based on Segment Routing over IPv6 (SRv6)
Published by IETF on July 1, 2022
Abstract This document defines procedures and messages for SRv6-based BGP services, including Layer 3 Virtual Private Network (L3VPN), Ethernet VPN (EVPN), and Internet services. It builds on...
This document is referenced by:
RFC 9552 - Distribution of Link-State and Trafc Engineering Information Using BGP
Published by IETF on December 1, 2023
In many environments, a component external to a network is called upon to perform computations based on the network topology and the current state of the connections within the network, including...
View Less
View All
Advertisement