UNLIMITED FREE
ACCESS TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Select Your Free Newsletters

Industry Newsletters

Select Your Free Product Alerts

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

FORD FLTM BL 107-01

COOLANT HOSE EXTRACTION TEST

active, Most Current
Buy Now
Organization: FORD
Publication Date: 14 January 2021
Status: active
Page Count: 6

Document History

FORD FLTM BL 107-01
January 14, 2021
COOLANT HOSE EXTRACTION TEST
A description is not available for this item.
FORD FLTM BL 107-01
January 22, 2020
COOLANT HOSE EXTRACTION TEST
A description is not available for this item.
FORD FLTM BL 107-01
February 14, 2019
COOLANT HOSE EXTRACTION TEST
A description is not available for this item.

References

This document references:
D4176 ADJUNCT SET - Adjunct to D4176 Combo: Laminated Charts of Distillate Fuel Haze Rating Standard and Distillate Fuel Bar Chart
A description is not available for this item.
This document references:
ASTM D1287 - Standard Test Method for pH of Engine Coolants and Antirusts
Published by ASTM on October 1, 2011
This test method covers the determination of the pH of unused engine coolants and antirusts, and used or unused aqueous dilutions of the concentrated products. NOTE 1—Antirusts in solid form are not...
This document references:
D4176 - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
October 1, 2022
This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an...
This document references:
D5827 - Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
June 1, 2022
This test method covers the chemical analysis of engine coolant for chloride ion by high-performance ion chromatography (HPIC). Several other common anions found in engine coolant can be determined...
This document references:
ASTM D6130 - Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
Published by ASTM on November 1, 2011
This test method covers the determination of silicon in engine coolant by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Silicon can be determined as low as the range of 5 ppm by...
This document is referenced by:
FORD WSE-M96D34-A1 - HOSE, EPDM RUBBER, PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on September 13, 2017
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
This document is referenced by:
FORD WSS-M96D34-A5 - HOSE, EPDM RUBBER, META-ARAMID OR MODIFIED PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, HIGH PRESSURE RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on September 13, 2017
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
This document is referenced by:
WSE-M96D34-A2 - HOSE, EPDM RUBBER, META-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 8, 2022
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
This document is referenced by:
WSE-M96D34-A3 - HOSE, EPDM RUBBER, RAYON OR PET FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, OR A COPOLYMER PARA-ARAMID ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 8, 2022
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
This document is referenced by:
FORD WSE-M96D34-A4 - HOSE, EPDM RUBBER, MODIFIED PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on September 13, 2017
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
View Less
View All
Advertisement