FORD - WSS-M64J40-A4
FLOW CONTROL ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
active, Most Current
| Organization: | FORD |
| Publication Date: | 5 December 2002 |
| Status: | active |
| Page Count: | 7 |
scope:
1. SCOPE
The materials defined by these specifications are heat curing, water-borne epoxy electrocoat primers and associated makeup feed components feed applied by the cathodic deposition process.
Document History
WSS-M64J40-A4
December 5, 2002
FLOW CONTROL ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
1. SCOPE The materials defined by these specifications are heat curing, water-borne epoxy electrocoat primers and associated makeup feed components feed applied by the cathodic deposition process.
October 26, 2000
FLOW CONTROL ADDITIVE
1. SCOPE The materials defined by these specifications are heat curing, water-borne epoxy electrocoat primers and associated makeup feed components feed applied by the cathodic deposition process.
September 2, 1999
FLOW CONTROL ADDITIVE
1. SCOPE The materials defined by these specifications are heat curing, water-borne epoxy electrocoat primers and associated makeup feed components feed applied by the cathodic deposition process.