UNLIMITED FREE
ACCESS TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Select Your Free Newsletters

Industry Newsletters

Select Your Free Product Alerts

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

FORD WSS-M14J521-A1

PRIMER THINNER

active, Most Current
Buy Now
Organization: FORD
Publication Date: 28 September 1998
Status: active
Page Count: 3
scope:

1. SCOPE

The materials defined by these specifications are solvent thinners.

Document History

WSS-M14J521-A1
December 1, 2023
PRIMER THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
The materials defined by these specifications are solvent thinners.
FORD WSS-M14J521-A1
September 28, 1998
PRIMER THINNER
1. SCOPE The materials defined by these specifications are solvent thinners.

References

This document references:
ASTM D1078 - Standard Test Method for Distillation Range of Volatile Organic Liquids
Published by ASTM on November 15, 2011
This test method covers the determination of the distillation range of liquids boiling between 30 and 350 °C, that are chemically stable during the distillation process, by manual or automatic...
This document references:
D1218 - Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
November 1, 2021
This test method covers the measurement of refractive index, accurate to four decimal places or better, of transparent and light-colored hydrocarbons in the range of 1.3300 to 1.5000 at temperatures...
This document references:
ASTM D1298 - Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
Published by ASTM on June 1, 2012
This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum,...
This document references:
ASTM D56 - Standard Test Method for Flash Point by Tag Closed Cup Tester
Published by ASTM on October 1, 2016
This test method covers the determination of the flash point, by tag manual and automated closed testers, of liquids with a viscosity below 5.5 mm2/s (cSt) at 40 °C (104 °F), or below 9.5 mm2/s (cSt)...
View Less
View All
Advertisement