This document references:
COE EM 1110-1-1000 - Photogrammetric and LiDAR Mapping
Published by COE
on
April 30, 2015
Purpose. This manual provides procedural guidance, accuracy standards, technical specifications, and quality control (QC) criteria for performing photogrammetric and Light Detection and Ranging...
This document references:
COE EM 1110-1-1002 - SURVEY MARKERS AND MONUMENTATION
Published by ARMY
on
March 1, 2012
This manual provides naming criteria, standard installation procedures, and associated surveying accuracies for horizontal and vertical control and boundary survey markers and monumentation for...
This document references:
COE EM 1110-1-1003 - NAVSTAR Global Positioning System Surveying
Published by ARMY
on
February 28, 2011
Purpose. This manual provides technical specifications and procedural guidance for surveying and mapping with the Global Positioning System (GPS) and other Global Navigation Satellite Systems (GNSS)....
This document references:
COE EM 1110-1-1005 - Control and Topographic Surveying
Published by ARMY
on
January 1, 2007
Purpose This manual provides guidance on performing detailed site surveys of military installation facilities and civil works projects. Technical specifications, procedural guidance, and quality...
This document is referenced by:
ASCE MOP 135 - MONITORING DAM PERFORMANCE
Published by ASCE
on
January 1, 2018
PREFACE This Manual of Practice for Monitoring Dam Performance: Instrumentation and Measurements is an addition to the series of publications by members of the Hydropower Committee of the Energy...
This document is referenced by:
UFGS-31 23 00.00 - TUNNEL EXCAVATION - BLASTING
Published by ARMY
on
November 1, 2021
This work must consist of excavation and disposal of all material within the rock tunnel limits indicated on the plans, in accordance with these specifications and in conformity to the lines, grades,...
This document is referenced by:
COE ETL 1110-2-586 - DEWATERING: METHODS, EVALUATION, DESIGN, INSTALLATION, AND PERFORMANCE MONITORING
Published by COE
on
May 24, 2023
Purpose. This Engineer Technical Letter (ETL) provides guidance for the planning, design, supervision, construction, and operation of construction phase dewatering and pressure relief systems, and of...