NEN-EN 10139
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
inactive
| Organization: | NEN |
| Publication Date: | 1 October 1992 |
| Status: | inactive |
| ICS Code (Flat steel products and semi-products): | 77.140.50 |
scope:
Applies to cold rolled narrow strip in coils and cut lenghts in thicknesses up to 10 mm and of widths less than 600 mm, made from mild, unalloyed and alloyed steels in accordance with table 1.
Document History
February 1, 2016
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
NEN-Eapplies to cold rolled narrow strip in coils and cut lengths in thicknesses up to 10 mm and of widths less than 600 mm, made from low carbon, unalloyed and alloyed steels in accordance with...
October 1, 2014
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
NEN-Eapplies to cold rolled narrow strip in coils and cut lengths in thicknesses up to 10 mm and of widths less than 600 mm, made from low carbon, unalloyed and alloyed steels in accordance with...
September 1, 2013
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
NEN-Eapplies to cold rolled narrow strip in coils and cut lengths in thicknesses up to 10 mm and of widths less than 600 mm, made from low carbon, unalloyed and alloyed steels in accordance with...
December 1, 1997
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
Applies to cold rolled narrow strip in coils and cut lenghts in thicknesses up to 10 mm and of widths less than 600 mm, made from mild, unalloyed and alloyed steels in accordance with table 1.
December 1, 1997
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
Applies to cold rolled narrow strip in coils and cut lenghts in thicknesses up to 10 mm and of widths less than 600 mm, made from mild, unalloyed and alloyed steels in accordance with table 1.
NEN-EN 10139
October 1, 1992
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
Applies to cold rolled narrow strip in coils and cut lenghts in thicknesses up to 10 mm and of widths less than 600 mm, made from mild, unalloyed and alloyed steels in accordance with table 1.