UNLIMITED FREE
ACCESS
TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

FMVSS - 49 CFR 571 76 FR 44829

Federal Motor Vehicle Safety Standards; Air Brake Systems

active, Most Current
Organization: FMVSS
Publication Date: 27 July 2011
Status: active
Page Count: 6
scope:

SUMMARY:

On July 27, 2009, NHTSA published a final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in stopping distance performance on new truck tractors. In response, the agency received eight petitions for reconsideration. The agency has already responded to most of the issues raised in the petitions. This document responds to the one outstanding issue raised in the petitions, stopping distance performance requirements at lower initial speeds. Based on testing results and our concern that the current requirements might not be practicable, NHTSA is slightly relaxing the stopping distance requirement for typical loaded tractors tested from an initial speed of 20 mph by increasing the distance from 30 feet to 32 feet and for unloaded tractors tested from an initial speed of 20 mph by increasing the distance from 28 feet to 30 feet. We believe no other changes are necessary.

Document History

49 CFR 571 76 FR 44829
July 27, 2011
Federal Motor Vehicle Safety Standards; Air Brake Systems
SUMMARY: On July 27, 2009, NHTSA published a final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in stopping distance...
Advertisement