GMW3314
Pilot Point with Truncated Cone - Metric Thread, Coarse Pitch
active, Most Current
| Organization: | GMW |
| Publication Date: | 1 May 2021 |
| Status: | active |
| Page Count: | 4 |
scope:
Purpose.
This standard specifies the characteristics of pilot points with truncated cone for external ISO metric threaded fasteners with coarse pitch M5, M6, M8, M10, M12, M14, and M16. The points are added to the specified nominal length of the fastener. This standard is based on ISO 4753, Type PC. Tolerance requirement is based on ISO 286.
Document History
GMW3314
May 1, 2021
Pilot Point with Truncated Cone - Metric Thread, Coarse Pitch
Purpose.
This standard specifies the characteristics of pilot points with truncated cone for external ISO metric threaded fasteners with coarse pitch M5, M6, M8, M10, M12, M14, and M16. The points...
May 1, 2015
Pilot Point with Truncated Cone - Metric Thread, Coarse Pitch
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence....
October 1, 2010
Pilot Point with Truncated Cone Metric Thread, Coarse Pitch
This standard specifies the characteristics of pilot points with truncated cone for external International Organization for Standardization (ISO) metric threaded fasteners with coarse pitch M5, M6,...
June 1, 2001
Pilot Point with Truncated Cone
1 Scope This standard specifies the characteristics of pilot points with truncated cone for external ISO metric threaded fasteners with coarse pitch M5, M6, M8, M10, M12, M14, and M16. The points are...
June 1, 2000
Pilot Point with Truncated Cone
1 Scope This standard specifies the characteristics of pilot points with truncated cone for external ISO metric threaded fasteners with coarse pitch M5, M6, M10, M12, M14, and M16. The points are...