This document references:
TIR16 - Microbiological aspects of ethylene oxide sterilization
Published by AAMI
on
January 1, 2017
This technical information report (TIR) addresses various microbiological aspects of the development and validation of an ethylene oxide (EO) sterilization process. It does not cover the various...
This document references:
21 CFR PART 820 - QUALITY SYSTEM REGULATION
Published by FAA
on
April 1, 2020
(a) Applicability. (1) Current good manufacturing practice (CGMP) requirements are set forth in this quality system regulation. The requirements in this part govern the methods used in, and the...
This document references:
29 CFR PART 1910 VOL 5 - OCCUPATIONAL SAFETY AND HEALTH STANDARDS
Published by DOL
on
July 1, 2021
Purpose and scope. (a) Section 6(a) of the Williams- Steiger Occupational Safety and Health Act of 1970 (84 Stat. 1593) provides that ‘‘without regard to chapter 5 of title 5, United States Code, or...
This document references:
TIR16 - Microbiological aspects of ethylene oxide sterilization
Published by AAMI
on
January 1, 2017
This technical information report (TIR) addresses various microbiological aspects of the development and validation of an ethylene oxide (EO) sterilization process. It does not cover the various...
This document is referenced by:
AAMI TIR15 - Physical aspects of ethylene oxide sterilization
Published by AAMI
on
January 1, 2016
This AAMI TIR provides additional guidance to augment ANSI/AAMI/ISO 11135:2014. This TIR addresses some of the physical aspects of ethylene oxide (EO) sterilization and provides guidance on...