NEMA - MG 1
Motors and Generators
active, Most Current
Organization: | NEMA |
Publication Date: | 1 January 2021 |
Status: | active |
Page Count: | 650 |
Document History
MG 1
January 1, 2021
Motors and Generators
A description is not available for this item.
January 1, 2018
Motors and Generators
This standard is applicable to direct-current machines tested with direct-current power and to polyphase alternating-current machines tested with sinusoidal power, in frame sizes 42 and larger and at...
March 3, 2017
Motors and Generators - Section IV Part 34: Air-Over Motor Efficiency Test Method
A description is not available for this item.
January 1, 2016
Motors and Generators
Assists users in the proper selection and application of motors and generators. Contains practical information concerning performance, safety, testing, and the construction and manufacture of ac and...
January 1, 2014
Motors and Generators
Foreword
The standards appearing in this publication have been developed by the Motor and Generator Section and approved for publication as standards of the National Electrical Manufacturers...
January 1, 2011
Motors and Generators
This Standard applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective enclosures that are in all...
January 1, 2011
Motors and Generators
Assists users in the proper selection and application of motors and generators. Contains practical information concerning performance, safety, testing, construction and manufacture of AC and DC...
January 1, 2009
Motors and Generators
This Standard applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective enclosures that are in all...
January 1, 2009
Motors and Generators
This Standard applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective enclosures that are in all...
January 1, 2006
Motors and Generators
This Standard applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective enclosures that are in all...
January 1, 2003
Motors and Generators
Foreword
The standards appearing in this publication have been developed by the Motor and Generator Section and approved for publication as Standards of the National Electrical Manufacturers...
January 1, 1998
Motors and Generators
Foreword The standards appearing in this publication have been developed by the Motor and Generator Section and approved for publication as Standards of the National Electrical Manufacturers...
January 1, 1993
Motors and Generators
Foreword
The standards appearing in this publication have been developed by the Motor and Generator Section and approved for publication as Standards of the National Electrical Manufactures...