This document references:
AASHTO LRFDUS - LRFD Bridge Design Specifications
Published by AASHTO
on
January 1, 2020
SCOPE OF THE SPECIFICATIONS The provisions of these Specifications are intended for the design, evaluation, and rehabilitation of both fixed and movable highway bridges. Mechanical, electrical, and...
This document references:
PRC-201.2 - Durable Concrete—Guide
Published by ACI
on
May 1, 2023
This guide discusses the important mechanisms of concrete deterioration and gives recommendations on how to mitigate or minimize such damage. This guide also addresses durability by first discussing...
This document is referenced by:
PRC-242 - Alkali-Activated Cements—Report
Published by ACI
on
November 1, 2022
This report defines relevant AAC terminology and a brief history of AACs. The fundamental materials science and engineering of AAC technology is discussed, along with the definitions of important...
This document is referenced by:
ACI 506R - Guide to Shotcrete
Published by ACI
on
June 1, 2016
Work specified (shotcreting processes)—The work should be classified as either structural or nonstructural. Shotcrete having a specified compressive strength of 4000 psi (28 MPa) or greater is...
This document is referenced by:
IGC 325 - High Efficiency Oil/Water Separators
Published by IAPMO
on
November 1, 2022
General This Standard covers high efficiency oil/water separators intended for residential and commercial applications and specifies requirements for materials, physical characteristics, performance...