GMNA - 9984538
Sealer - Pumpable, Low Bake, Paintable, Ultralight
inactive, Most Current
| Organization: | GMNA |
| Publication Date: | 1 December 2022 |
| Status: | inactive |
| Page Count: | 1 |
scope:
This standard is inactive with no replacement.
Note: The 9984538 part number may still be active. Please contact the GM Material Engineer if there are any questions.
Document History
9984538
December 1, 2022
Sealer - Pumpable, Low Bake, Paintable, Ultralight
This standard is inactive with no replacement.
Note: The 9984538 part number may still be active. Please contact the GM Material Engineer if there are any questions.
September 1, 2016
Sealer - Pumpable, Low Bake, Paintable, Ultralight
This specification details the requirements of a low bake, paintable ultralight sealer. The material is applied in the paint shop after Electrocoat (e-coat) bake and before the application of primer...
May 1, 2010
Sealer - Pumpable, Low Bake, Paintable, Ultralight
1 Scope. This specification details the requirements of a low bake paintable ultralight sealer. The material is applied in the paint shop after E-Coat bake and before the application of primer...
December 1, 2003
Sealer - Pumpable, Low Bake, Paintable, Ultralight
1 Scope. This specification details the requirements of a low bake paintable ultralight sealer. The material is applied in the paint shop after E-Coat bake and before the application of primer...
June 1, 1997
Sealer - Pumpable, Low Bake Paintable, Ultralight, Higher Pressure Stability Robotic Application
1 SCOPE. This specification details the requirements of a low bake paintable ultralight sealer. The material is applied in the paint shop after Elpo bake and must be capable of being either flow...