This document references:
NR/L2/TRK/001 - Inspection and Maintenance of Permanent Way
Published by NR
on
June 5, 2021
The requirements of the modules in this standard apply to the inspection and maintenance of the following assets on running lines and sidings: a) plain line track; b) switches and crossings (S&C)....
This document references:
NR/L3/TRK/3220 - Planning of On-Track Machines
Published by NR
on
August 26, 2008
The Procedure applies to the planning of Tampers (Plain Line and S&C), Ballast Regulators, Dynamic Track Stabilisers and Stone blowers (Plain Line and S&C) by teams within the Maintenance,...
This document references:
NR/L3/TRK/3230 - Control of on Track Machines
Published by NR
on
August 26, 2008
The procedure applies to the control of: • Tampers (Plain Line and S&C), • Ballast Regulators, • Dynamic Track Stabilisers and • Stone blowers (Plain Line and S&C) by teams within the Maintenance...
This document references:
NR/L3/TRK/3240 - Preparation for Use of on Track Machines
Published by NR
on
August 26, 2008
This procedure applies to all Maintenance work sites where tampers, stone blowers, DTS and ballast regulators are to be used on all Non Enhanced Permissible Speed (EPS) lines. This procedure shall be...
This document is referenced by:
NR/L3/TRK/002 - Track Maintenance Handbook
Published by NR
on
June 4, 2011
The TMH shall be used by all Track / Off Track Engineering and Maintenance staff undertaking Patrolling, Inspection, Maintenance of Track/Off Track assets. Use of the TMH will establish a consistent...