NPFC - MIL-V-18110
VALVES, GATE, CAST OR FORGED ALLOT STEEL, OUTSIDE SCREW AND YOKE
inactive
Buy Now
| Organization: | NPFC |
| Publication Date: | 4 May 1959 |
| Status: | inactive |
| Page Count: | 15 |
Document History
March 5, 2018
VALVES, GATE TYPE, STEEL SIZES 2½ INCHES TO 16 INCHES)
Steel gate valves are intended for use in steam, water, and oil service for use in naval shipboard steam, water, and oil service. Existing stock of steel gate valves manufactured to...
February 19, 1991
VALVES, GATE TYPE, STEEL (SIZES 2-1/2 INCHES TO 16 INCHES)
This specification covers steel gate valves in sizes 2-½ inches to 16 inches for steam, water and oil services on shipboard.
March 20, 1978
VALVES, GATE TYPE, STEEL (SIZES 2-1/2 INCHES TO 16 INCHES)
This specification covers outside screw and yoke cast or forged steel and alloy stee&e valves in sizes 2-1/2 inches and larger.
September 1, 1976
VALVES, GATE TYPE, STEEL (SIZES 2-1/2 INCHES TO 16 INCHES)
A description is not available for this item.
July 24, 1961
VALVES, GATE TYPE, STEEL (SIZES 2-1/2 INCHES TO 16 INCHES)
This specification covers outside screw and yoke cast or forged steel and alloy steel gate valves (basically commercial valves).
July 20, 1959
VALVES, GATE TYPE, STEEL (SIZES 2-1/2 INCHES TO 16 INCHES)
A description is not available for this item.
June 5, 1959
VALVES, GATE, CAST OR FORGED ALLOY STEEL, OUTSIDE SCREW AND YOKE
A description is not available for this item.
MIL-V-18110
May 4, 1959
VALVES, GATE, CAST OR FORGED ALLOT STEEL, OUTSIDE SCREW AND YOKE
A description is not available for this item.
November 23, 1954
VALVES, GATE TYPE, STEEL (SIZES 2-1/2 INCHES TO 16 INCHES)
A description is not available for this item.