UNLIMITED FREE
ACCESS TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Select Your Free Newsletters

Industry Newsletters

Select Your Free Product Alerts

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

FORD ESR-M5B106-A

CLEANER, TAR AND ROAD OIL REMOVER ***TO BE USED WITH FORD WSS-M99P1111-A***

active, Most Current
Buy Now
Organization: FORD
Publication Date: 19 August 2002
Status: active
Page Count: 3
scope:

1.SCOPE

The material defined by this specification is a liquid tar and road oil remover.

Document History

FORD ESR-M5B106-A
August 19, 2002
CLEANER, TAR AND ROAD OIL REMOVER ***TO BE USED WITH FORD WSS-M99P1111-A***
1.SCOPE The material defined by this specification is a liquid tar and road oil remover.
FORD ESR-M5B106-A
December 8, 1978
CLEANER, TAR AND ROAD OIL REMOVER
1. SCOPE The material defined by this specification is a liquid tar and road oil remover.

References

This document references:
FORD WSS-M99P1111-A - STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS ***TO BE USED WITH FORD WSS-M99P9999-A1***
Published by FORD on April 4, 2012
This document defines the standard requirements for Production Materials.
This document references:
ASTM D1078 - Standard Test Method for Distillation Range of Volatile Organic Liquids
Published by ASTM on November 15, 2011
This test method covers the determination of the distillation range of liquids boiling between 30 and 350 °C, that are chemically stable during the distillation process, by manual or automatic...
This document references:
D268 - Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
January 1, 2022
This guide covers procedures for the sampling and testing of volatile solvents used in the manufacture of paint, lacquer, varnish, and related products. The test methods are listed in Table 1. For...
This document references:
ASTM D611 - Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
Published by ASTM on November 1, 2012
These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Test Method A is suitable for transparent samples with an initial boiling point above...
This document references:
ASTM D891 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
Published by ASTM on August 1, 2018
These test methods cover the determination of the specific gravity, apparent, of liquid industrial chemicals. Two test methods are covered as follows: Test Method A, specific gravity, apparent, by...
This document is referenced by:
FORD ESB-M16J6-A - PAINT, COLOR COAT FOR THERMOPLASTIC, IMPACT RESISTANT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on January 1, 2012
The material defined by this specification is a pigmented lacquer suitable for use as exterior finish for high energy absorbent thermoplastic substrates.
This document is referenced by:
FORD ESB-M16J14-A - ENAMEL, THERMOSET 2-COMPONENT COLOR COAT, EXTERIOR, HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on January 1, 2012
The materials defined by these specification are pigmented two-component urethanes suitable for an exterior quality coating.
This document is referenced by:
FORD ESB-M16J14-A2 - EMAMEL, THERMOSET 2-COMPONENT COLOR COAT, EXTERIOR, HIGH GLOSS, POLISH RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on January 1, 2012
The materials defined by these specification are pigmented two-component urethanes suitable for an exterior quality coating.
This document is referenced by:
FORD WSB-M16J16-A - PAINT, WATERBORNE, 2 COMPONENT COMPLIANCE VOC, PLASTICS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on January 1, 2012
The material defined by this specification is a waterborne, two component paint system for use on thermoplastic exterior parts subject to polar solvents, abrasion and limited sunlight.
This document is referenced by:
FORD WSB-M99D61-A2 - DRY PAINT FILM LAMINATE, FINISHED PARTS, PLASTICS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on July 4, 2013
The material defined by this specification is a dry paint film laminate for use on thermoplastic exterior parts.
View Less
View All
Advertisement