FORD - WSE-M2D470-A3
DUCT, CSM, CHLOROSULFONATED POLYETHYLENE, MOLDED AIR INTAKE
inactive
| Organization: | FORD |
| Publication Date: | 1 January 1996 |
| Status: | inactive |
| Page Count: | 5 |
Document History
September 21, 2009
DUCT, CSM, CHLOROSULFONATED POLYETHYLENE, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by these specifications is a non-reinforced molded duct with good compression set heat and ozone resistance.
October 13, 2004
DUCT, CSM, CHLOROSULFONATED POLYETHYLENE, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by these specifications is a non-reinforced molded duct with good compression set heat and ozone resistance.
October 30, 1996
DUCT, CSM, CHLOROSULFONATED POLYETHYLENE, MOLDED AIR INTAKE
1. SCOPE The material defined by this specification is a non-reinforced molded duct with good compression set heat and ozone resistance.
WSE-M2D470-A3
January 1, 1996
DUCT, CSM, CHLOROSULFONATED POLYETHYLENE, MOLDED AIR INTAKE
A description is not available for this item.