IEEE 303
Recommended Practice for Auxiliary Devices for Motors in Class I, Groups A, B, C, and D, Division 2 Locations
inactive
Buy Now
| Organization: | IEEE |
| Publication Date: | 27 June 1991 |
| Status: | inactive |
| Page Count: | 11 |
Document History
September 1, 2023
Draft Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations and Class II, Division 2 and Zone 22 Locations
This recommended practice is limited to auxiliary devices associated with rotating electrical machines operating in Class I Division 2 and Zone 2 or Class II Division 2 and Zone 22 areas, as...
June 24, 2004
Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
This recommended practice is limited to auxiliary devices associated with rotating electrical machines operating in Division 2 or Zone 2 areas, classified as Class I under the practice of NFPA...
June 24, 2004
Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
The following information is intended to bring together a brief description of basic electrical practices with regard to the application and installation of auxiliary devices to rotating electrical...
IEEE 303
June 27, 1991
Recommended Practice for Auxiliary Devices for Motors in Class I, Groups A, B, C, and D, Division 2 Locations
A description is not available for this item.
June 27, 1991
Recommended Practice for Auxiliary Devices for Motors in Class I, Groups A, B, C, and D, Division 2 Locations
A description is not available for this item.
June 13, 1984
RECOMMENDED PRACTICE FOR AUXILIARY DEVICES FOR MOTORS IN CLASS 1 - GROUPS A, B, C, AND D, DIVISION 2 LOCATIONS
A description is not available for this item.
July 1, 1969
Recommended Practice for Auxiliary Devices for Motors in Class I, Groups A, B, C, and D, Division 2 Locations
Introduction
The scope of this Recommended Practice is limited to auxiliary devices associated with motors operating in Division 2 areas, classified as Class I, Groups A, B, C, and D locations. This...