NAVY - MIL-L-7866
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
inactive
| Organization: | NAVY |
| Publication Date: | 24 January 1952 |
| Status: | inactive |
| Page Count: | 7 |
scope:
This specification establishes requirements for powdered molybdenum disulfide, to be used for the lubrication of sliding surfaces where boundary conditions exist.
intended Use:
The molybdenum disulfide covered by this specification is intended for use as a lubricant on sliding surfaces where boundary conditions exist. Oil or grease should be applied after coating exposed... View More
Document History
September 21, 1998
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
A description is not available for this item.
October 24, 1991
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
A description is not available for this item.
August 10, 1981
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
A description is not available for this item.
July 11, 1979
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
The molybdenum disulfide is intended to function as a lubricant contained in grease and solid films by reducing friction and wear under low and high sliding velocities where boundary lubricants...
November 23, 1966
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
A description is not available for this item.
July 15, 1965
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
A description is not available for this item.
December 22, 1955
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
This material is intended for general use as a lubricant on surfaces at low and high sliding velocities where boundary and extreme pressure conditions exist. In can be applied to metallic and...
MIL-L-7866
January 24, 1952
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE
The molybdenum disulfide covered by this specification is intended for use as a lubricant on sliding surfaces where boundary conditions exist. Oil or grease should be applied after coating exposed...