NPFC - QQ-A-225/7
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
inactive
Buy Now
| Organization: | NPFC |
| Publication Date: | 30 June 1983 |
| Status: | inactive |
| Page Count: | 5 |
scope:
This specification covers the specific requirements for aluminum alloy 5052 bar, rod, and wire produced by rolling, drawing, or cold fininshing.
intended Use:
This alloy may be used where good workability, very good resistance to corrosion, high fatigue strength, weldability, and moderate static strength are desired.
Document History
April 7, 1998
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
A description is not available for this item.
April 7, 1998
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
A description is not available for this item.
October 30, 1991
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
NOTICE OF VALIDATION
QQ-A-225/7D, dated 30 June 1983, has been reviewed and determined to be valid for use in acquisition.
QQ-A-225/7
June 30, 1983
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
This alloy may be used where good workability, very good resistance to corrosion, high fatigue strength, weldability, and moderate static strength are desired.
June 9, 1971
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
A description is not available for this item.
March 9, 1967
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
A description is not available for this item.
December 16, 1963
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
A description is not available for this item.
January 5, 1962
ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED
A description is not available for this item.