FORD ESB-M4D383-A2
POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
inactive, Most Current
Buy Now
| Organization: | FORD |
| Publication Date: | 12 October 2006 |
| Status: | inactive |
| Page Count: | 3 |
scope:
The materials defined by these specifications are compression or injection moldable thermoplastic polyolefin copolymers that have been modified for increased impact resistance.
Document History
FORD ESB-M4D383-A2
October 12, 2006
POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
The materials defined by these specifications are compression or injection moldable thermoplastic polyolefin copolymers that have been modified for increased impact resistance.
May 26, 2005
POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
The materials defined by these specifications are compression or injection moldable thermoplastic polyolefin copolymers that have been modified for increased impact resistance.
February 12, 1982
POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE
1. SCOPE: The materials defined by these specifications are compression or injection moldable thermo-plastic polyolefin copolymers that have been modified for increased impact resistance.