SAE International - AS85421/15B
FITTING, ELBOW, 45°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
active
Buy Now
| Organization: | SAE International |
| Publication Date: | 10 August 2006 |
| Status: | active |
Document History
AS85421/15B
August 10, 2006
FITTING, ELBOW, 45°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
A description is not available for this item.
References
This document references:
AMS2486 - CONVERSION COATING OF TITANIUM ALLOYS Fluoride - Phosphate Type
Published by SAE International
on
May 1, 1973
This specification establishes the engineering requirements for producing chemical conversion coatings on titanium-base alloys and the properties of such coatings.
This document references:
AMS2759/3 - Heat Treatment, Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
Published by SAE International
on
August 10, 2011
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for heat treatment of precipitation-hardening corrosion-...
This document references:
AMS4928 - TITANIUM ALLOY 6Al - 4V Annealed - 120,000 psi Yield
Published by SAE International
on
July 1, 1957
A description is not available for this item.
This document references:
AMS4965 - TITANIUM ALLOY BARS AND FORGINGS 6Al - 4V Heat Treated
Published by SAE International
on
September 30, 1966
A description is not available for this item.
This document references:
AMS5643 - STEEL, BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 4.5Ni - 4Cu Precipitation Hardening
Published by SAE International
on
October 1, 1951
A description is not available for this item.
This document references:
AMS5659 - STEEL BARS, FORGINGS AND RINGS, CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
Published by SAE International
on
September 1, 1965
A description is not available for this item.
This document references:
AMSH6875 - Heat Treatment of Steel, Process for
Published by SAE International
on
November 1, 1998
This specification covers the requirements for heat-treatment of four classes of steel (see 1.2 ) and the requirements for furnace equipment, test procedures and information for heat-treating...
This document references:
AMSQQP35 - Passivation Treatments for Corrosion-Resistant Steel
Published by SAE International
on
May 1, 1998
This specification covers the different types of passivation treatments as well as recommendations, guidance and precautions for cleaning and descaling corrosion-resistant parts, components,...
This document references:
AS478 - IDENTIFICATION MARKING OF ITEMS FOR AIRCRAFT POWER PLANTS
Published by SAE International
on
May 15, 1960
This standard covers permanent marking intended to be easily and accurately read during the normal service life of the item and also covers temporary marking intended to provide legible...
This document references:
AS85421 - Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For
Published by SAE International
on
July 1, 1998
This specification covers the design requirements and test procedures for separable beam seal fittings which includes end fittings (see 6.10.3 ), fitting bodies (see 6.10.6 ), and boss fittings (see...