FORD - WSS-M4D959-A
POLYPROPYLENE (PP), HOMOPOLYMER 20 % CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25 % MIN POST CONSUMER CONTENT
inactive
| Organization: | FORD |
| Publication Date: | 12 December 1997 |
| Status: | inactive |
| Page Count: | 6 |
scope:
1. SCOPE
The material defined by this specification is a 20 % calcium carbonate filled thermoplastic molding compound based on polypropylene homopolymer (25 % min post consumer content).
Document History
August 8, 2011
POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a 20% calcium carbonate filled thermoplastic molding compound based on polypropylene homopolymer (25% min post consumer content).
July 26, 2006
POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a 20% calcium carbonate filled thermoplastic molding compound based on polypropylene homopolymer (25% min post consumer content).
August 30, 2000
POLYPROPYLENE (PP), HOMOPOLYMER 20 % CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25 % MIN POST CONSUMER CONTENT
1. SCOPE The material defined by this specification is a 20 % calcium carbonate filled thermoplastic molding compound based on polypropylene homopolymer (25 % min post consumer content).
WSS-M4D959-A
December 12, 1997
POLYPROPYLENE (PP), HOMOPOLYMER 20 % CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25 % MIN POST CONSUMER CONTENT
1. SCOPE The material defined by this specification is a 20 % calcium carbonate filled thermoplastic molding compound based on polypropylene homopolymer (25 % min post consumer content).