GMW3220
Laminate Bond Strength
inactive
| Organization: | GMW |
| Publication Date: | 1 June 2000 |
| Status: | inactive |
| Page Count: | 2 |
scope:
1 Scope
Note: Nothing in the specification supersedes appli-cable laws and regulations unless a specific exemp-tion has been obtained.
Document History
August 1, 2016
Laminate Bond Strength
Introduction
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take...
February 1, 2011
Laminate Bond Strength
Note: Nothing in this standard supersedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence....
September 1, 2005
Laminate Bond Strength
This test method is used to determine the average force required to physically separate one of two or more flat pliable layers from a laminate assembly.
Note: Nothing in this test method supersedes...
May 1, 2005
Laminate Bond Strength
This test method is used to determine the average force required to physically separate one of two or more flat pliable layers from a laminate assembly.
Note: Nothing in this test method supersedes...
April 1, 2001
Laminate Bond Strength
1 Scope This test method is used to determine the average force required to physically separate one of two or more flat pliable layers from a laminate assembly. Note: Nothing in this test method...
October 1, 2000
Laminate Bond Strength
1 Scope This test method is used to determine the average force required to physically break the bond between (peel) one of two or more flat pliable layers from a laminate assembly.
GMW3220
June 1, 2000
Laminate Bond Strength
1 Scope Note: Nothing in the specification supersedes appli-cable laws and regulations unless a specific exemp-tion has been obtained.