FORD WSK-M4D699-A
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
active, Most Current
Buy Now
| Organization: | FORD |
| Publication Date: | 19 October 2006 |
| Status: | active |
| Page Count: | 4 |
scope:
The material defined by this specification is a semi-rigid, 30% calcium carbonate filled thermoplastic polyolefin elastomeric (TPO) injection molding compound with good damping properties.
Document History
FORD WSK-M4D699-A
October 19, 2006
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a semi-rigid, 30% calcium carbonate filled thermoplastic polyolefin elastomeric (TPO) injection molding compound with good damping properties.
November 30, 2005
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a semi-rigid, 30% calcium carbonate filled thermoplastic polyolefin elastomeric (TPO) injection molding compound with good damping properties.
October 26, 2000
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED
1. SCOPE The material defined by this specification is a semi-rigid, 30 % calcium carbonate filled thermoplastic polyolefin elastomeric (TPO) injection molding compound with good damping properties.
February 1, 1990
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 30% CALCIUM CARBONATE FILLED
1. SCOPE The material defined by this specification is a semi-rigid, 30 % calcium carbonate filled thermoplastic polyolefin elastomeric (TPO) injection molding compound with good damping properties.