This document references:
GMW14444 - Material Related Interior Part Performance
Published by GMW
on
November 1, 2020
Purpose. This standard covers the material related part performance requirements for all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
This document is referenced by:
GMW14334 - Chemical Resistance to Fluids
Published by GMW
on
September 1, 2021
Purpose. The object of this test procedure is to determine the effects of fluids on automotive trim materials and components. Examples of fluids are cleaning agents, perspiration, etc. See Appendix...
This document is referenced by:
GMW14573 - Global Performance Requirements for Labels
Published by GMW
on
October 1, 2022
Purpose. This standard defines the requirements and strategy for labels on GM vehicles sold worldwide. Labels required in this standard are intended to convey information as well as to comply with...
This document is referenced by:
GMW16449 - Electrical Component Fluid Compatibility
Published by GMW
on
December 1, 2017
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take...
This document is referenced by:
GMW14834 - Speaker Validation and Reliability Test Specification
Published by GMW
on
March 1, 2018
Purpose. This document is the GM World Standard for speaker component Analysis (A), Development/Evaluation (D), Design Validation (DV), and Product Validation (PV) procedures as well as environmental...