loading
NSF 14 - Plastics Piping System Components and Related Materials
June 22, 2020 - NSF

The physical, performance, and health effects requirements in this Standard apply to thermoplastic and thermoset plastic piping system components including, but not limited to, pipes, fittings, valves, joining materials, gaskets, and appurtenances. The established physical, performance, and health...

NISO RP-14 - NISO SUSHI Protocol: COUNTER-SUSHI Implementation Profile
January 1, 2012 - NISO

This Implementation Profile addresses the choices and expectations for successfully implementing a compliant and effective SUSHI service delivering consistent and comparable COUNTER XML reports compliant with Release 4 of the COUNTER Code of Practice. This document focuses on the use of the various...

NCSL RP-14 - Selecting Standards Lab Environments
January 1, 2005 - NCSL
A description is not available for this item.
CEI 14 - Test procedures guide for power transformers
October 1, 1997 - CEI

La presente Guida fornisce indicazioni sulle modalità di esecuzione delle prove sui trasformatori di potenza conformi a quanto indicato nella Sezione 1 della Norma CEI 14-4. Si sottolinea tuttavia che le indicazioni fornite dal presente documento hanno carattere di suggerimento e pertanto...

SMPTE RP 14 - Plotting Data from Sensitometric Strips Exposed on Type Ib (Intensity Scale) Sensitometers
January 22, 1997 - SMPTE
A description is not available for this item.
ABMA STD 14 - Housing For Bearings With Spherical Outside Surfaces
January 1, 1995 - ABMA

This standard specifies boundary dimensions and tolerances for ball bearings with spherical outside surfaces and extended inner ring width. The feature of mating housing and bearing spherical surfaces is intended to provide initial self-alignment at mounting. Included are pillow block, flanged and...

IES RP 14 - Recommended Practice for Airport Service Area Lighting
January 1, 1987 - IES
A description is not available for this item.
AA 14 - Aluminum Forgings Application Guide
January 1, 1984 - AA

Forging, as an industry, is as old as the Industrial Revolution; it was also among the earliest fabricating techniques applied to aluminum. But the greatest advances of aluminum forging technology occurred with the development of modern aircraft. The demands of aeronautics for lightweight,...

ISO 14 - Straight-Sided Splines for Cylindrical Shafts with Internal Centering - Dimensions, Tolerances and Verification
January 1, 1982 - ISO

Scope and field of application This International Standard lays down dimensions, in millimetres, of straight-sided splines for cylindrical shafts with internal centering, light series and medium series. This International Standard also specifies control methods and corresponding gauges.

ADA 14 - Dental Base Metal Casting Alloys
January 1, 1982 - ADA

This specification covers dental base metal casting alloys used in the fabrication of removable dental prostheses. ADA14-1982D

AATCC 14 - COLORFASTNESS CHANGE IN COTTON AND LINEN TEXTILES
AATCC
A description is not available for this item.
HI/HYDRON 014 - Set of Technical Topics TT-1A through TT-9
HI/HYDRON
A description is not available for this item.
IEEE 14 - Instrument Transformers
March 1, 1925 - IEEE

The Standards in this section apply to transformers designed for use with measuring or control devices.

ASTM SECTION 14 - GENERAL METHODS AND INSTRUMENTATION
ASTM
A description is not available for this item.
SCTE 14 - TEST METHOD FOR HEX CRIMP TOOL VERIFICATION/CALIBRATION
SCTE
A description is not available for this item.
SMPTE 14 - VIDEO RECORDING-PLASTIC REELS-1/2-IN MAGNETIC TAPE
SMPTE
A description is not available for this item.
ASHRAE STD 14 - METHODS OF TESTING FOR RATING POSITIVE DISPLACEMENT
ASHRAE
A description is not available for this item.
Advertisement