loading
AFS 3DSPB - 3D Sand Printing Benefits
AFS
A description is not available for this item.
AFS 3DSPMD - 3D Sand Printing Mold Quality
AFS
A description is not available for this item.
AFS 3DSPCD - 3D Sand Printing Casting Design
AFS
A description is not available for this item.
AFS 3DSPPT - 3D Sand Printing Process and Terminology
AFS
A description is not available for this item.
APA 3D-004 - APA Full-Scale House Test Project: Progress Report 4
January 1, 2007 - APA
A description is not available for this item.
APA 3D-005 - APA Full-Scale House Test Project: Progress Report 5
January 1, 2007 - APA
A description is not available for this item.
APA 3D-002 - APA Full-Scale House Test Project: Progress Report 2
January 1, 2007 - APA
A description is not available for this item.
APA 3D-003 - APA Full-Scale House Test Project: Progress Report 3
January 1, 2007 - APA
A description is not available for this item.
APA 3D-007 - APA Full-Scale House Test Project: Progress Report 7
January 1, 2007 - APA
A description is not available for this item.
APA 3D-001 - APA Full-Scale House Test Project: Progress Report 1
November 1, 2006 - APA
A description is not available for this item.
ASTM D6989-03(2026) - Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
June 1, 2026 - ASTM International

4.1 This practice provides a means of preparing resin solutions by the "cold cut" method, modeling high-shear production dispersion techniques.

ASTM D1933-03(2026) - Standard Specification for Nitrogen Gas as an Electrical Insulating Material
January 1, 2026 - ASTM International

1.1 This specification covers three types of nitrogen used as an electrical insulating material in electrical equipment: 1.1.1 Type I, obtained from the air by liquefaction processes and dried, 1.1.2 Type II, obtained from the air by liquefaction processes, deoxidized with hydrogen over a platinum...

ASTM D6464-03a(2026) - Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
January 1, 2026 - ASTM International

1.1 This specification establishes minimum performance requirements for determining strength, aging, and working properties of expandable foam adhesives intended for bonding back surfaces of gypsum wallboards of all thicknesses to wood framing. Minimum physical and performance requirements are...

ASTM D6207-03(2025)e1 - Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
November 1, 2025 - ASTM International

5.1 The measured dimensional stability of a fabric determines whether a fabric has the potential to retain its original shape and remain stable, indicating it will not bubble or sag over time, when applied over a substrate, and its suitability for a specified use. 5.2 This test method is...

ASTM D4695-03(2025) - Standard Guide for General Pavement Deflection Measurements
October 1, 2025 - ASTM International

5.1 NDT measurement of pavement surface deflections provides information that can be used for the structural evaluation of new or in-service pavements. These deflection measurements may be used to determine the following pavement characteristics: 5.1.1 Modulus of each layer. 5.1.2 Overall stiffness...

ASTM D2813-03(2025) - Standard Practice for Sampling Leather for Physical and Chemical Tests
August 1, 2025 - ASTM International

4.1 The sampling procedures described in this practice have been designed to ensure random sampling of finished leather and fabricated leather items for physical and chemical tests. Leather is a natural product and as such is subject to extensive variability. The physical and chemical properties...

ASTM D1070-03(2025)e1 - Standard Test Methods for Relative Density of Gaseous Fuels
June 1, 2025 - ASTM International

5.1 These test methods provide accurate and reliable methods to measure the relative density of gaseous fuels on an intermittent or continuous basis. These measurements are frequently used for regulatory or contract compliance custody transfer and process control.

ASTM D7-27 - Test Method for Sieve Analysis of Fine and Aggregates (Withdrawn 1938)
January 1, 2027 - ASTM International
A description is not available for this item.
Advertisement