loading
GME CCD8787 - SCCS Standard for Arc Welding
November 1, 2011 - GME
A description is not available for this item.
GME CCD8788 - SCCS Standard for Laser Welding
November 1, 2011 - GME
A description is not available for this item.
GME CCD8789 - SCCS Standard for Spot Welding
November 1, 2011 - GME
A description is not available for this item.
AFS CCDG - Copper Casting Defects: Gating
AFS
A description is not available for this item.
AFS CCDS - Copper Casting Defects: Shrinkage
AFS
A description is not available for this item.
GME CCD14064 - LOUDSPEAKERS REFERENCE TEST STANDARDS
GME
A description is not available for this item.
ACGIH 0680C CD - Sax’s Dangerous Properties of Industrial Materials
January 1, 2004 - ACGIH
A description is not available for this item.
ASME Q0002A-C CD - ASME BPVC SECTION II
IHS
A description is not available for this item.
ASTM E2698-26 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
February 1, 2026 - ASTM International

1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...

ASTM F3294-18(2024) - Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
October 1, 2024 - ASTM International

1.1 This guidance document has been developed to facilitate the collection of microscopy images with an epifluorescence microscope that allows quantitative fluorescence measurements to be extracted from the images. The document is tailored to cell biologists that often use fluorescent staining...

ASTM E2157-15(2024) - Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
May 1, 2024 - ASTM International

1.1 This test method covers the procedure for obtaining and analyzing pavement macrotexture profiles using the Circular Track Meter (CT Meter). 1.2 The CT Meter consists of a charge coupled device (CCD) laser-displacement sensor that is mounted on an arm that rotates such that the...

ASTM E2186-02a(2023) - Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
December 1, 2023 - ASTM International

5.1 A common result of cellular stress is an increase in DNA damage. DNA damage may be manifest in the form of base alterations, adduct formation, strand breaks, and cross linkages (19). Strand breaks may be introduced in many ways, directly by genotoxic compounds, through the induction of...

ASTM E3398-23 - Standard Guide for Digital Neutron Radiography
July 1, 2023 - ASTM International

1.1 This guide covers the evaluation, qualification, and quantification of digital neutron images. These images can be acquired by many methods, including: neutron sensitive imaging plates (Computed Radiography - CR), Digital Detector Arrays - DDA's (amorphous silicon, CMOS, CCD, etc.),...

ASTM E2642-09(2021) - Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
September 1, 2021 - ASTM International

1.1 This terminology brings together and clarifies the basic terms and definitions used with scientific grade cooled charge-coupled device (CCD) detectors, thus allowing end users and vendors to use common documented terminology when evaluating or discussing these instruments. CCD...

ASTM E3029-15(2023) - Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
January 1, 2023 - ASTM International

3.1 Calibration of the responsivity of the detection system for emission (EM) as a function of EM wavelength (?EM), also referred to as spectral correction of emission, is necessary for successful quantification when intensity ratios at different EM wavelengths are being compared or when the true...

DS/CLC/TS 50459-3 - Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Part 3: Ergonomic arrangements of non ETCS information
March 22, 2021 - DS

This document describes from an ergonomic point of view how non ETCS information are arranged and displayed on the CCD. More specifically, it covers information that is not within the scope of ERA document ERA_ERTMS_015560. This document describes two possible technologies for implementing...

ASTM E578-07(2021) - Standard Test Method for Linearity of Fluorescence Measuring Systems
April 1, 2021 - ASTM International

1.1 This test method covers a procedure for evaluating the limits of the linearity of response with fluorescence intensity of fluorescence-measuring systems under operating conditions. Particular attention is given to slit widths, filters, and sample containers. This test method can be used to test...

API RP 585 - Pressure Equipment Integrity Incident Investigation
March 1, 2021 - API

General The purpose of this document is to provide owner-operators with practices for developing, implementing, sustaining, and enhancing an investigation program for pressure equipment integrity (PEI) incidents. This recommended practice (RP) describes characteristics of how an effective...

IES LM-77 - APPROVED METHOD: INTENSITY DISTRIBUTION MEASUREMENT OF LUMINAIRES AND LAMPS USING DIGITAL SCREEN IMAGING PHOTOMETRY
January 1, 2020 - IES

This IES Approved Method addresses the use of digital cameras incorporating a CCD array. However, it should be noted that other types of digital camera sensors, such as CID (charge-injection device) arrays, CMOS (complementary metal oxide semiconductor) arrays, and scanned photodiode arrays,...

API RP 571 - Damage Mechanisms Affecting Fixed Equipment in the Refining Industry
March 1, 2020 - API

This recommended practice discusses damage mechanisms applicable to oil refineries; however, much of the information herein can also be applied to petrochemical and other industrial applications, as the user deems appropriate. It is up to the user to determine the applicability and appropriateness...

Advertisement