loading
AASHTO GPSS - Guide for Painting Steel Structures
January 1, 1997 - AASHTO

Painting Bare Steel a.Shop Painting For the purposes of this Guide, repainting steel from an existing bridge that is returned to a shop qualified to clean existing steel by blast cleaning to an acceptable surface condition (see section 11) and recoating is subject to the same requirements as newly...

GPSA ENGRG DATA EU COMBO - GPSA ENGINEERING DATA BOOK EU (ENGLISH UNITS)
GPA
A description is not available for this item.
GPSA ENGRG DATA METRIC CD - GPSA ENGINEERING DATA (METRIC)
GPA
A description is not available for this item.
GPSA ENGRG DATA SI COMBO - GPSA ENGINEERING DATA BOOK SI
GPA
A description is not available for this item.
ICD-GPS-200 - INTERFACE CONTROL DOCUMENT GPS (200)
AF
A description is not available for this item.
ASTM D6172/D6172M-18(2026) - Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
July 15, 2026 - ASTM International

1.1 This test method covers procedures concerning site preparation, technical procedures, quality control, and equipment to direct the efforts for determining volumes of bulk material. These procedures include practical and accepted methods of volumetric determination. 1.2 This test method allows...

ASTM E3524/E3524M-26 - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Rotate
April 15, 2026 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control...

ASTM E3408/E3408M-25a - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Inspect
November 1, 2025 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control...

ASTM E3408/E3408M-25 - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Inspect
January 15, 2025 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control...

ASTM E2991/E2991M-25 - Standard Test Method for Evaluating Response Robot Mobility: Traverse Gravel Terrain
January 15, 2025 - ASTM International

5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of robotic system mobility and remote operator proficiency. This gravel terrain specifically challenges robotic system locomotion, suspension systems to maintain traction, rollover tendencies,...

ASTM E2992/E2992M-24 - Standard Test Method for Evaluating Response Robot Mobility: Traverse Sand Terrain
December 1, 2024 - ASTM International

5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of robotic system mobility and remote operator proficiency. This sand terrain specifically challenges robotic system locomotion, suspension systems to maintain traction, rollover tendencies,...

SAE1026 - Toughening a PNT System with COTS Inline GPS/GNSS Jamming Protection
November 20, 2023 - SAE International

This recommended practice describes how to toughen a new or existing PNT system with the installation of inline GPS/GNSS jamming protection.

ASTM E3426/E3426M-24 - Standard Test Method for Evaluating Aerial Response Robot Endurance
February 1, 2024 - ASTM International

5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of robotic system mobility and remote pilot proficiency. The operational endurance of a robot significantly impacts the performance of the robot during a variety of tasks. Robot endurance is a...

AS6009A - JAUS Mobility Service Set
October 6, 2023 - SAE International

This document defines a set of standard application layer interfaces called JAUS Mobility Services . JAUS Services provide the means for software entities in an unmanned system or system of unmanned systems to communicate and coordinate their activities. The Mobility Services represent the vehicle...

ASTM E3408/E3408M-23 - Standard Test Method for Evaluating Ground Response Robot Capabilities: Dexterity: Linear Inspection
September 15, 2023 - ASTM International

5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control unit...

ASTM E3380/E3380M-23 - Standard Test Method for Evaluating Ground Response Robot Endurance Using Reproducible Terrains
April 1, 2023 - ASTM International

5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of robotic system mobility and remote operator proficiency. The operational endurance of a ground robot significantly impacts the performance of the robot during a variety of tasks. Robot...

ASTM F2745-15(2023) - Standard Specification for Required Product Information to be Provided with an Airplane
January 1, 2023 - ASTM International

1.1 The following requirements apply to the documentation of Light Sport Airplanes. This specification covers the Pilot's Operating Handbook (POH), Flight Training Supplement (FTS), Maintenance Manual, Aircraft Kit Assembly Instructions (KAI), Component Original Equipment Manufacturer (OEM)...

ASTM E1391-03(2023) - Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates
January 1, 2023 - ASTM International

5.1 Sediment toxicity evaluations are a critical component of environmental quality and ecosystem impact assessments, and are used to meet a variety of research and regulatory objectives. The manner in which the sediments are collected, stored, characterized, and manipulated can influence the...

Advertisement