loading
AWWA TANK SET - AWWA TANK SET
AWWA
A description is not available for this item.
DIN EN 16299 - Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
June 1, 2013 - DIN

This European Standard defines the conditions necessary for an effective application of the cathodic protection method to mitigate corrosive attacks on the external surfaces of above ground storage steel tank bottoms in contact with soil, cushion or foundations. This...

DS/EN 16299 - Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
April 18, 2013 - DS

This European Standard defines the conditions necessary for an effective application of the cathodic protection method to mitigate corrosive attacks on the external surfaces of above ground storage steel tank bottoms in contact with soil, cushion or foundations. This...

API REPORT GROUND MOTION - Ground Motion Intensity Factors and Acceleration Response Spectra Ninth Edition API RP 2A Earthquake Design Provisions Eastern Gulf of Alaska Region
November 1, 1978 - API

PERSPECTIVE This report documents a study of earthquake design criteria for the eastern Gulf of Alaska. This study backgrounded a portion of the development of the Ninth Edition of API RP 2A's Section 2.10 earthquake design guideline effective ground acceleration and response spectra. This...

AWWA STORAGE SET - AWWA STORAGE SET
AWWA
A description is not available for this item.
ASTM F1488-26a - Standard Specification for Coextruded Composite Pipe
August 1, 2026 - ASTM International

1.1 This specification covers coextruded composite pipe, intended for non-pressure gravity flow drain waste or vent (DWV) service, or plastic underdrain service, or electrical or comunications conduit service produced by a coextrusion die system, in which the concentric layers are formed and...

ASTM D3299-26 - Standard Specification for Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
April 1, 2026 - ASTM International

This specification covers cylindrical corrosion-resistant tanks made of commercial-grade glass-fiber-reinforced polyester or vinylester thermoset resin fabricated by filament winding for above-ground vertical installation, to contain aggressive chemicals at atmospheric pressure...

EEMUA PUB NO 159 - Above ground flat bottomed storage tanks: A guide to inspection maintenance and repair
September 1, 2017 - EEMUA

This guideline sets out the key features required for planning and executing inspection, maintenance and repair works on aboveground fully supported vertical steel storage tanks. The descriptions of key tank components that require inspection and/or maintenance, of degradation...

API/EI TR 545-A - Verification of lightning protection requirements for above ground hydrocarbon storage tanks
October 1, 2009 - API

GENERAL This section provides a summary of the present knowledge on the lightning flash process and attachment mechanism so that the hazard to tanks can be described in terms of natural lightning behaviour.

Advertisement