QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-A-22262 Abrasive Blasting Media Ship Hull Blast Cleaning This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such...
1.1 This practice covers the procedures to be followed in the preparation (by abrasive blast cleaning) of hot rolled steel panels for laboratory testing of coatings. 1.2 This standard practice does not include procedures for the application of coatings. 1.3 The values stated in...
1.1 This guide covers metallic abrasive blasting to descale the interior of carbon steel pipe. 1.2 This guide is recommended for use in conjunction with an abrasive reclamation system. 1.3 The values stated in SI units are to be regarded as standard. The values given in...
This commercial item description (CID) establishes the functional requirements and design features of non-metallic abrasive blast grit recycling equipment that is capable of cleaning, removing fines and dust, and adding back appropriately sized new grit to match the working...
This Standard specifies abrasive blast-cleaning methods for the surface preparation of steel products before the application of paints or related products for the purpose of rust and corrosion prevention, and also specifies the basic matters relating to blastcleaning abrasive...
This standard defines the "Thorough Abrasive Blast Cleaning" level of surface cleanliness achieved using abrasive blast cleaning on uncoated or coated non-ferrous or stainless-steel surfaces. The standard also includes requirements for materials and procedures used to...
This document covers procedures, equipment, and materials involved in a variety of air/water/abrasive, water/abrasive, and water-pressurized abrasive blast cleaning systems. Equipment usage and safety are also discussed.
This document covers procedures, equipment, and materials involved in a variety of air/water/abrasive, water/abrasive, and water-pressurized abrasive blast cleaning systems. Equipment usage and safety are also discussed.
General This recommended practice (RP) provides safe work practices for the prevention and control of vapor, ignition, and other potential hazards during abrasive blasting of aboveground storage tanks in liquid hydrocarbon service at atmospheric pressure. It is generally recognized in...
This standard describes the materials and equipment used for abrasive blast cleaning the inside of ferritic piping and it defines the different levels of surface cleanliness, which can be achieved. Other mechanical cleaning methods such as brushing, grinding, chipping, sanding, etc.,...
This standard specifies requirements to be met by the manufacturer of abrasive blasting equipment for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance and decommissioning of the equipment which employ either...
This standard defines the Intermediate Blast Cleaning level of surface cleanliness achieved using abrasive blast cleaning. The standard includes requirements for the resulting condition of the surface as determined by visual inspection and procedures used to achieve and verify...
This standard defines the Thorough Blast Cleaning level of surface cleanliness achieved using abrasive blast cleaning. The standard includes requirements for the resulting condition of the surface as determined by visual inspection and materials and procedures used to achieve...
This standard defines the Brush Blast Cleaning level of surface cleanliness achieved using abrasive blast cleaning. The standard includes requirements for the resulting condition of the surface as determined by visual inspection and materials and procedures used to achieve and...
4.1 Abrasive media may contain ionic contamination naturally (for example, mineral abrasives), from manufacturing (quenching with contaminated water), transportation, storage or use (in the case of abrasive that is reused). Ionic contamination on the abrasive may...
This document specifies the requirements for supplied breathable gas respiratory protective device (RPD) and filtering RPD to be used for special application marine, mining, welding and abrasive blasting for use in the workplace to protect the wearer.
1.1 This guide covers metallic abrasive blasting to descale the interior of carbon steel pipe. 1.2 This guide is recommended for use in conjunction with an abrasive reclamation system. 1.3 The values stated in SI units are to be regarded as standard. The values given in...
1.1 This practice covers the procedures to be followed in the preparation (by abrasive blast cleaning) of hot rolled steel panels for laboratory testing of coatings. 1.2 This standard practice does not include procedures for the application of coatings. 1.3 The values stated in...
Narrow Your Results