loading
MS 15797 - DRESSERS, ABRASIVE WHEEL HAND
NPFC
A description is not available for this item.
MS 15796 - CUTTERS, ABRASIVE WHEEL DRESSER, HAND
NPFC
A description is not available for this item.
GGG-D-631 - DRESSER, ABRASIVE WHEEL, HAND, REVOLVING CUTTER TY
NPFC
A description is not available for this item.
ASTM D4060-25 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
January 15, 2025 - ASTM International

5.1 Coating on substrates can be damaged by abrasion during its service life. This test method has been useful in evaluating the abrasion resistance of coatings. Ratings produced by this test method have correlated well with ratings produced by the falling abrasive values in Test Methods...

ASTM D6037-26 - Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
June 1, 2026 - ASTM International

1.1 This test method covers procedures for evaluating the relative mar resistance of high gloss coatings. Two test methods are included. Test Method A uses a device that rotates the test specimen on a vertical axis, against the sliding rotation of two abrading wheels. Test Method B uses a device...

ASTM G105-26 - Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
April 1, 2026 - ASTM International

5.1 The severity of abrasive wear in any system depends on several factors: the size, shape, and hardness of the abrasive particles; the stress they apply; and how frequently they come into contact with the material. In this test method, these variables are standardized to create a...

JIS H 8682-1 - Anodizing of aluminium and its alloys-Measurement of abrasion resistance of anodic oxidation coatings- Part 1 : Abrasive-wheel-wear abrasion resistance test
May 20, 2013 - JSA

This Standard specifies the method for testing the wear characteristics such as wear resistance by abrading (reciprocal motion) the surface of flat and smooth anodic oxidation coating exceeding 5μm in thickness (hereafter referred to as "coatings") applied to the products manufactured from aluminum...

ASTM C856/C856M-25 - Standard Practice for Petrographic Examination of Hardened Concrete
February 1, 2025 - ASTM International

This practice outlines the standard procedures for performing petrographic examination of hardened concrete samples. The samples examined may be taken from concrete constructions, that is, all sorts of objects, units, or structures that have been built of hydraulic cement concrete. They may also be...

ASTM C1803/C1803M-23 - Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
December 1, 2023 - ASTM International

5.1 Wear on mortar surfaces can be generated by a number of factors including skidding, scraping or sliding of objects on the surface, foot and tire traffic. This guide provides a means to quantify the abrasion resistance of treated or untreated mortars and other similar products. FIG. 1 Rotary...

QPL-17663 - WHEEL, ABRASIVE, MOUNTED (POINTS)
NPFC
A description is not available for this item.
MIL-W-37584 - WHEEL, ABRASIVE, ALUMINUM OXIDE
NPFC
A description is not available for this item.
MIL-W-17663 - WHEEL, ABRASIVE, MOUNTED (POINTS)
NPFC
A description is not available for this item.
A-A-51285 - WHEEL, ABRASIVE, (DENTAL)
NPFC
A description is not available for this item.
A-A-51751 - WHEEL, ABRASIVE (ALUMINUM OXIDE)
NPFC
A description is not available for this item.
ASTM D1044-24 - Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
June 1, 2024 - ASTM International

1.1 This test method describes a procedure for estimating the resistance of transparent plastics to one kind of surface abrasion by measuring the change in optical properties. 1.2 Abrasive damage is numerically quantified by calculating the difference in haze percentage in accordance with...

ASTM G195-22 - Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
June 1, 2022 - ASTM International

5.1 This test guide provides a means to quantify the abrasion resistance of material surfaces, and may be related to end-use performance, or used to comparatively rank material performance, or both. The resistance of material surfaces to abrasion, as measured on a testing machine in the laboratory,...

A-A-51311 - WHEEL, ABRASIVE, IMPREGNATED RUBBER, PUMICE
NPFC
A description is not available for this item.
ASTM D7255-22 - Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
April 1, 2022 - ASTM International

5.1 The resistance of leather to abrasion, as measured on a testing machine in the laboratory, is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While "abrasion resistance" (often stated in terms of the number...

ASTM D7255-22e1 - Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
April 1, 2022 - ASTM International

5.1 The resistance of leather to abrasion, as measured on a testing machine in the laboratory, is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While "abrasion resistance" (often stated in terms of the number...

ASTM B1023-22 - Standard Test Method for Abrasion Resistance of Hard Anodic Coatings by a Taber-Type Abraser
August 1, 2022 - ASTM International

5.1 Hard anodic oxidation coatings are often used to obtain improved resistance to abrasion, and have been used in such applications as valves, sliding parts, hinge mechanisms, cams, gears, swivel joints, pistons, insulation plates, blast shields, etc. 5.2 This abrasion resistance test method may...

Advertisement