4.1 Based on the measurements of strain and acceleration close to the pile top, possibly combined with those from accelerometers or strain transducers located further down the pile, this test method assesses the pile top velocity and force in response to an axial impact force. 4.2 The...
1.1 This practice covers guidelines for using accelerometers in test vehicles to evaluate dynamic accelerations resulting from various maneuvers such as braking, accelerating, or cornering. 1.2 This practice is applicable to accelerometers that are rigidly attached to the body of the...
5.1 Impact Value, as determined using the standard 4.5 kg (10 lbm) hammer, has direct application to design and construction of pavements and a general application to earthworks compaction control and evaluation of strength characteristics of a wide range of materials, such as soils, soil...
1.1 This test method covers determination of the dynamic elastic properties of isotropic and near isotropic carbon and graphite materials at ambient temperatures. Specimens of these materials possess specific mechanical resonant frequencies that are determined by the elastic modulus, mass, and...
This user's manual covers the Hybrid III 10-year old child test dummy. The manual is intended for use by technicians who work with this test device. It covers the construction and clothing, assembly and disassembly, available instrumentation, external dimensions and segment masses, as well as...
4.1 This standard practice is intended for use whenever the dynamic characteristics of a water slide are to be determined using instrumented humans. 4.2 The use of this standard practice does not preclude the substitution of other published Amusement Industry accepted standard practices developed...
Accelerometers are transducers, or sensors, that convert acceleration into an electrical signal that can be used for airframe, drive, and propulsion system vibration monitoring and analysis within vehicle health and usage monitoring systems. This document defines interface requirements for...
This user's manual covers the Hybrid III 3-year old child test dummy. The manual is intended for use by technicians who work with this test device. It covers the construction and clothing, assembly and disassembly, available instrumentation, external dimensions and segment masses, as well as...
The purpose of this document is to provide the user with the procedures needed to properly assemble and disassemble the 50 2x percentile male Hybrid III dummy, certify its components and verify its mass and dimensions. Also within this manual are guidelines for handling accelerometers,...
This document specifies the important technical properties of the different methods for mounting vibration transducers and describes recommended practices. It also shows examples of how accelerometer mounting can influence frequency response and gives examples of how other influences can...
This document specifies the important technical properties of the different methods for mounting vibration transducers and describes recommended practices. It also shows examples of how accelerometer mounting can influence frequency response and gives examples of how other influences can...
The specification and test requirements for a linear, single-axis, nongyroscopic accelerometer for use in inertial navigation, guidance, and leveling systems are defined. A standard specification format guide and a compilation of recommended test procedures for such accelerometers are...
4.1 Based on the measurements of force and displacement at the pile top, possibly combined with those from accelerometers or strain transducers located further down the pile, these test methods measure the pile top deflection in response to an axial compressive force pulse. The relatively...
1.1 This practice covers guidelines for using accelerometers in test vehicles to evaluate dynamic accelerations resulting from various maneuvers such as braking, accelerating, or cornering. 1.2 This practice is applicable to accelerometers that are rigidly attached to the body of the...
1.1 This test method covers the measurement and recording of the profile of vehicular-traveled surfaces with an accelerometer-established inertial reference on a profile measuring vehicle. 1.2 The test method uses measurement of the distance between an inertial plane of reference and the...
Build feature-rich, reliable Android Pie apps with the help of more than 100 proven industry standard recipes and strategies. Key Features *Uncover the latest features in Android 9 Pie to make your applications stand out *Develop Android Pie applications with the latest mobile technologies, from...
The purpose of this Recommended Practice (RP) is to provide guidelines for selecting accelerometers to measure shock and vibration in laboratory and field testing environments. Many special applications are not covered (e.g., pyroshock [1,2], consumer products) because of their unique nature...
5.1 Concepts: 5.1.1 This guide summarizes the basic equipment, field procedures, and interpretation methods used for detecting, delineating, or mapping shallow subsurface features and relative changes in layer geometry or stratigraphy using the seismic-reflection method. Common applications of the...
5.1 Concepts: 5.1.1 This guide summarizes the equipment, field procedures, and interpretation methods used for the determination of the depth, thickness and the seismic velocity of subsurface soil and rock or engineered materials, using the seismic refraction method. 5.1.2 Measurement of subsurface...
Narrow Your Results