loading
IEEE CONTROL HDBK - THE CONTROL HANDBOOK
IEEE
A description is not available for this item.
PCMCIA SYSTEM - PCMCIA SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
STANDARDS MANAGEMENT - STANDARDS MANAGEMENT: A HANDBOOK FOR PROFITS
ANSI
A description is not available for this item.
AWI QUALITY STANDARDS - ARCHITECTURAL WOODWORK QUALITY STANDARDS ILLISTRATED
AWI
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP SI - 2020 ASHRAE Handbook HVAC Systems and Equipment SI Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP IP - 2020 ASHRAE Handbook HVAC Systems and Equipment I-P Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASTM C901-26 - Standard Guide for Design and Installation of Prefabricated Masonry Elements
June 1, 2026 - ASTM International

This specification covers the structural design and quality control of fabrication for load-bearing and non-load-bearing prefabricated masonry panels. Structural design of panels shall be performed in accordance with the provisions of the applicable local building code and the...

AAMI QUALITY SYSTEM - THE QUALITY SYSTEM COMPENDIUM: REQ & INDUSTRY PRACTICE
AAMI
A description is not available for this item.
AAMI QUALITY SYSTEM CD - QUALITY SYSTEM COLLECTION CD
AAMI
A description is not available for this item.
ASTM D8220-20(2026) - Standard Guide for Conducting Recall/Removal Procedures for Products in the Cannabis Industry
April 15, 2026 - ASTM International

4.1 In this guide, steps are suggested for the effective development, control, and management of procedures and records required for an effective product recall/removal from the marketplace. 4.2 This guide presents a systematic approach to procedures and documentation regarding the...

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

4.1 Laser profiling assessment is a quality control tool for identifying and quantifying deformation, physical damage, and other pipe anomalies after installation, providing means and methods for determining the quality of workmanship and compliance with project specifications....

ASTM F3095-17a(2026) - Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
June 1, 2026 - ASTM International

4.1 Laser profiling assessment is a quality control tool for identifying and quantifying deformation, physical damage, and other pipe anomalies after installation, providing means and methods for determining the quality of workmanship and compliance with project specifications....

ASTM D5283-18(2025) - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
November 1, 2025 - ASTM International

5.1 Environmental data are often required for making regulatory and programmatic decisions. These data must be of known quality commensurate with their intended use. 5.2 Data generation efforts involve the following: establishment of the DQOs; design of the project plan to meet the DQOs;...

ASTM D6008-26 - Standard Practice for Determining the Environmental Condition of Federal Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this practice is to define good commercial and customary practice in the United States for assessing the environmental condition of property (ECP) of federal real property. This practice applies to property under consideration for lease, excess and surplus property at...

ISA CONTROL SYSTEMS ENGIN - Control Systems Engineering (CSE) Study Guide
January 1, 2012 - ISA

This downloadable fifth edition is for use by individuals preparing for the Control Systems Professional Engineer (CSPE) examination. This update includes the latest examination specification that goes into effect with the October 2011 offering. The manual provides candidates for the...

ASTM E1699-26 - Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
January 1, 2026 - ASTM International

5.1 Use of this practice may increase performance in one or more areas including: cost control; resource allocation; schedule management; quality control; risk management; or safety. Perform VE/VA as early as possible in the life cycle of the focus of study, and...

ASTM F2970-25 - Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
December 1, 2025 - ASTM International

5.1 This practice is intended to provide consistent criteria, references and operational considerations in the specifications, management and construction of institutional trampoline courts. 5.2 This practice applies to architects, designers, engineers, construction contractors,...

ISA CONTROL SYSTEMS SAFET - Control Systems Safety Evaluation and Reliability
January 1, 2010 - ISA

This book is intended to serve a wide variety of users. This updated third edition provides the detailed background necessary to understand how to meet important new safety regulations and reliability engineering topics. Professional control system designers will learn to properly...

ASTM E3335-25 - Standard Guide for Design, Selection, and Application of Vehicle Security Barriers
October 15, 2025 - ASTM International

1.1 This guide is intended to be used by facility owners, military commanders, security personnel, planners, specifiers, designers, and engineers in the selection and application of vehicle security barrier systems for entry control facilities (ECFs), access control...

Advertisement