loading
ICBO ACCESSIBILITY - ACCESSIBILITY REFERENCE GUIDE
ICBO
A description is not available for this item.
AIHA INTERNET ACCESS - USING THE INTERNET TO ACCESS HEALTH AND SAFETY RESOURCES
AIHA
A description is not available for this item.
ASTM F2233-03(2026) - Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
June 1, 2026 - ASTM International

4.1 Safety factors must be addressed and incorporated into the work to protect the workers and the public, and construction activities may need to be altered accordingly. Engineering and construction costs are a part of the analysis. 4.2 Access rights to the work should be considered in the...

ASTM C901-26 - Standard Guide for Design and Installation of Prefabricated Masonry Elements
June 1, 2026 - ASTM International

4.1 This guide is intended to provide information and guidance for designers, specifiers, manufacturers, contractors and users that are considering the use of prefabricated masonry elements. This guide identifies situations when prefabrication could be considered where other prefabricated systems...

ASTM D5958-99(2026) - Standard Practices for Preparation of Oil-Based Ink Resin Solutions
June 1, 2026 - ASTM International

1.1 These practices describe laboratory procedures for preparing an oil-based ink resin solution in a high-boiling solvent using four pieces of lab equipment: (1) A hot oil bath (Sections 4 to 11), (2) A stirrer/hot plate (Sections 12 to 16), (3) An industrial blender (Sections 17 to 22), and (4) A...

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

1.1 Laser profiling is a non-contact inspection method used to create a pipe wall profile and internal measurement using a standard CCTV pipe inspection system, 360° laser light projector, a measurement by means of infrared sensors and geometrical profiling software. This practice covers the...

ASTM E1324-21(2026) - Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
May 1, 2026 - ASTM International

4.1 The recommended measurement procedures described in this guide are intended to provide performance-related measurements that can be reproduced under the specified test conditions using commercially available test instrumentation. These measurements indicate capabilities of sections of the...

ASTM E1685-20(2026) - Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
April 1, 2026 - ASTM International

5.1 The techniques described provide for the measurement of change in length of a fastener. Such measurements are made from one end of the specimen without requiring access to the rear surface. 5.2 The Ultrasonic Pulse Echo technique is used to monitor changes in length of fasteners and as a...

ASTM F3095-17a(2026) - Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for the post installation verification and acceptance of buried pipe deformation using a visible rotating laser light diode(s), a pipeline and conduit inspection analog or digital CCTV camera system and image processing software. The combination CCTV pipe...

ASTM ASTM52116-26 - Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
May 1, 2026 - ASTM International

4.1 The design and operation of a self-contained irradiator should ensure that reproducible absorbed doses are obtained when the same irradiation parameters are used. Dosimetry is performed to determine the relationship between the irradiation parameters and the absorbed dose. 4.1.1 For most...

ASTM E3527-26 - Standard Guide for Preservation of Microorganisms
April 1, 2026 - ASTM International

1.1 There is an ongoing need to maintain, preserve, and standardize microbiological cultures for research. This guide is focused on three parts of microbe preservation: 1.1.1 Process Description-This includes detailed microbe characterization data and documentation of microbial passaging,...

ASTM A1038-26 - Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
February 15, 2026 - ASTM International

4.1 The hardness of a material is a defined quantity having many scales and being dependent on the way the test is performed. In order to avoid the creation of a new method involving a new hardness scale, the UCI method converts into common hardness values, for example, HV, HRC, etc. 4.2 The UCI...

ASTM F2840-26 - Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
March 1, 2026 - ASTM International

3.1 This specification provides designers and manufacturers of electric propulsion for light sport aircraft design references and criteria to use in designing and manufacturing EPUs. 3.2 Declaration of compliance is based on testing and documentation during the design, ground testing and flight...

ASTM D7338-26 - Standard Guide for Assessment Of Fungal Growth in Buildings
January 1, 2026 - ASTM International

5.1 This guide presents options for a systematic assessment of fungal growth in buildings. 5.2 This guide allows for site-specific flexibility and professional judgment in the choice of assessment procedures. It may not be necessary to perform in its entirety the basic assessment presented below to...

ASTM F3756-26 - Standard Practice for Grasp-Type Robot End-Effectors: Split Force Measurement Apparatus
February 1, 2026 - ASTM International

5.1 To design relevant performance metrics and methods for characterizing grasp-type end-effectors, this practice helps to understand the contextual or application-specific issues surrounding robotic grasping and manipulation. Characterization of an end-effector should not be thought of in terms of...

ASTM E3517/E3517M-26 - Standard Practice for Flaw Sizing using Total Focusing Method
February 1, 2026 - ASTM International

5.1 Flaws that are made during manufacturing or that occur during service of a component have the potential to cause the component to fail. NDT methods such as described in Practice E2700 are intended to locate flaws that have the potential to result in component failure. Since not all flaws will...

ASTM E2356-26 - Standard Practice for Comprehensive Building Asbestos Surveys
February 1, 2026 - ASTM International

4.1 Management of asbestos-containing materials in buildings and facilities requires knowledge of the location, type, quantity, and condition of the material. The more complete and accurate the information available, the more appropriate and cost-effective are the control measures used to reduce...

ASTM E2700-26 - Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
January 1, 2026 - ASTM International

5.1 Phased array ultrasonic testing (PAUT) is an advanced examination technique used for enhanced flaw detection, sizing, and imaging as compared to conventional UT employing single-element transducers. PAUT utilizes multi-element (array) probes in which groups of elements are pulsed with...

Advertisement