5.1 This practice is used to evaluate the efficacy of antimicrobial products for indoor surfaces, including products that gain antimicrobial properties by adding active ingredients, such as in paints and coatings. It bridges the gap between traditional wet tests for sanitizers and...
5.1 Tests made on a material under conditions herein prescribed are of considerable value in comparing the relative smoke obscuration characteristics of plastics. 5.2 This test method serves to determine the extent to which plastic materials are likely to smoke under conditions of active...
4.1 This classification is intended to encourage uniformity in reporting properties of MLS and Metal Layer gaskets, to provide a common language for communications between producers and users, and to guide engineers and designers in the application and construction of commercially available gaskets...
1.1 This test method covers the determination of the degree and rate of anaerobic biodegradation of plastic materials in high-solids anaerobic conditions. The test materials are exposed to a methanogenic inoculum derived from anaerobic digesters operating only on pretreated household waste. The...
1.1 This guide provides recommendations for the installation of paintball barrier netting that may be used to delineate playing fields, chronograph areas, target ranges, and other "goggle-on" areas of an active paintball site. 1.2 The values stated in SI units are to be regarded as the...
1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of any wing-borne flight, semi-thrustborne flight, and thrustborne flight, or combinations thereof. Specifically, this version of the specification is...
4.1 The ENDF/B library in the United States and similar libraries elsewhere, such as JEFF (21), JENDL (22), and BROND (24), provide a compilation of neutron cross section and other nuclear data for use by the nuclear community. The availability of these excellent evaluations makes possible a...
1.1 This specification covers minimum requirements for primary aircraft structures critical to the safety of flight and is applicable to aircraft capable of wing-borne flight, semi-thrust-borne flight, thrust-borne flight or autorotation-borne flight. Specifically, this version of the specification...
4.1 This practice may be used to evaluate the microbial retentivity of any membrane filter used for liquid sterilization where validation is required in the manufacturing of pharmaceutical, biopharmaceutical, and biological products or their intermediates (where applicable). These processes may...
1.1 To determine the bactericidal or bacteriostatic properties of porous articles treated with an active biocidal agent, samples of porous treated materials, such as textiles or paper, are inoculated with a defined suspension of microorganisms and then incubated. The changes in numbers of...
1.1 This classification is to serve as an international standard for marine equipment nomenclature, taxonomy, hierarchical data structure, unique identifiers, and boundary definition for the consistent acquisition and exchange of equipment RAM performance data. The standard addresses the...
5.1 The durability of antimicrobial agents applied to textiles is an important attribute for many of the available technologies on the market. Antimicrobial agents that claim durability are typically fixed ionically, covalently or physically, or both, to a textile surface and are expected to retain...
5.1 This test method provides a measurement of the presence of surfactants in aviation turbine fuels. Like previous obsolete Test Methods D2550 and D3602 and current Test Methods D3948 and D8073, this test method can detect trace amounts of refinery treating chemicals in fuel. The test methods can...
1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of any wing-borne flight, semi-thrust-borne flight, and thrust-borne flight, or combinations thereof. Specifically, this version of the specification is...
1.1 This practice describes the required smoldering ignition fire properties for seating, upholstery, and padding materials used for vehicles associated with amusement rides and devices. 1.2 This practice includes an annex with an example of an optional open flame test method for padding materials....
1.1 This test method covers the transfer of calibration from reference to field pyranometer to be used for measuring and monitoring solar radiation. This standard is applicable to spectrally flat A, B, and C categories as defined in ISO 9060, as well as to silicon photodiode pyranometers. With...
1.1 This test method covers the determination of inorganic "active oxygen" in bleaching compounds such as perborates, percarbonates, and peroxides but not in persulfates or monopersulfates. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its...
5.1 The fire performance of a material or product is affected by a combination of its fire-test-response characteristics. Two of the most commonly determined fire-test-response characteristics of cushioning materials are the surface flammability, in accordance with Test Method D3675, and the...
Narrow Your Results