This document establishes a standard for the design, manufacture, construction, operation, and maintenance of passenger ropeways. For this standard, passenger ropeway categories include: aerial tramways (single and double reversible); - aerial lifts (detachable lifts,...
1.1 This test method covers a procedure for acoustic emission (AE) testing of digger derricks. 1.1.1 Equipment Covered-This test method applies to special multipurpose vehicle-mounted machines, commonly known as digger derricks. These machines are primarily designed to dig holes, set poles, and...
1.1 This specification defines the requirements for the planning, design, and establishment of vertiports intended to service vertical takeoff and landing (VTOL) aircraft. These aircraft include, but are not limited to, standard category aircraft, optionally piloted aircraft, and unmanned aircraft....
Purpose The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis, primarily used to position personnel, and for the training of operators for...
This test method describes a procedure for acoustic emission (AE) testing of aerial personnel devices (APDs) with supplemental load handling attachments. Equipment Covered-This test method covers the following types of vehicle-mounted aerial personnel devices with supplemental load...
This Standard describes the design, construction, load rating, installation, erection, inspection, maintenance, repair, modification, test, and operation of lattice and telescopic boom mobile cranes. Note: See Annex A for illustrations of mobile cranes and Annex B for illustrations of parts of a...
Purpose This standard establishes NASA's minimum requirements for, but not all details of, the design, construction, testing, inspection, maintenance, operation, and personnel licensing of lifting devices and equipment (LDE) listed in section 1.2 in order to enhance safety and reliability...
This standard provides methods and guidelines to prepare MEWP training materials, defines administrative criteria, and delivers elements required for proper training and familiarization. It applies to all types and sizes of MEWPs as specified in ANSI/SAIA A92.20 (design, calculations, safety...
1.1 This test method describes a procedure for acoustic emission (AE) testing of aerial personnel devices (APDs) with supplemental load handling attachments. 1.1.1 Equipment Covered-This test method covers the following types of vehicle-mounted aerial personnel devices with...
This CID) covers self-propelled personnel, telescopic boom type, aerial work platforms (herein after, referred to as the work platform). The work platform is used for various types of overhead construction and maintenance work.
This document specifies requirements for the manufacture, testing, acceptance, packing, marking and issuing of a certificate of quality of wire ropes. It is applicable to round strand ropes and compacted strand ropes made from wires ropes that are uncoated (bright), zinc-coated or Zn-Al coated. It...
4.1 Access to the exterior and interior of structures is often required as part of maintenance or inspection work. Depending on the characteristics of the structure and site constraints, access can often be achieved using a number of methods other than industrial rope access, including ladders,...
4.1 Access to the exterior and interior of structures is often required as part of maintenance or inspection work. Depending on the characteristics of the structure and site constraints, access can often be achieved using a number of methods other than industrial rope access, including ladders,...
This European Standard specifies the safety requirements applicable to carriers for cableway installations for passenger transportation. This standard is applicable to the various types of installations and takes into account their environment. This European Standard sets out the requirements to be...
This European Standard specifies the safety requirements applicable to carriers for cableway installations for passenger transportation. This standard is applicable to the various types of installations and takes into account their environment. This standard sets out the requirements to be met for...
This European Standard specifies the safety requirements applicable to carriers for cableway installations designed to carry persons. It is applicable to the various types of installations and takes into account their environment. This European Standard describes the requirements to be met when...
1.1 This test method covers a procedure for acoustic emission (AE) testing of digger derricks. 1.1.1 Equipment Covered-This test method applies to special multipurpose vehicle-mounted machines, commonly known as digger derricks. These machines are primarily designed to dig holes, set poles, and...
Scope, Purpose, Requirements, and Application Scope. Equipment Covered. This standard relates to the following types of vehicle-mounted aerial devices: (1) Extensible boom aerial devices. (2) Aerial ladders. (3) Articulating boom aerial devices. (4) Vertical towers. (5)...
This International Standard specifies safety requirements and preventive measures, and the means for their verification, for all types and sizes of mobile elevating work platforms (MEWPs) intended for moving persons to working positions. It gives the structural design calculations and stability...