Preface Beverage cans and many parts in aircraft, appliances, and automobiles are made of thin sheet metals formed by stamping operations at room temperature. Thus, sheet metal forming processes play an important role in mass production. Conventionally, the forming process and tool...
INTRODUCTION BACKGROUND The Sheet Metal and Air Conditioning Contractors' National Association, Inc. (SMACNA) has found that joining metal by welding is one of the most labor−intense operations in the sheet metal industry. Predicting and controlling the costs and quality of welding is...
A welcome update to the second edition, published in 1993, the updated Aluminum Casting Technology will feature the latest information on aluminum casting alloys, melting practices and furnaces, chemical and physical characteristics, design, casting processes, gating & risering, heat...
This specification establishes the requirements for UNS C61300 and C61400 copper aluminum bronze alloy sheets, strips, and rolled bars. These products are intended for drawing, forming, stamping, and bending applications but not for electrical applications. Each product is hot or cold...
This specification covers aluminum and aluminum alloy foil in the form of laminated sheet.
This specification covers the requirements for wrought aluminum alloy sheet for heat shields. This specification is applicable only to non-age hardenable aluminum alloys. Non-age hardenable aluminum alloy sheet supplied to the specification shall be formable by...
This standard covers the requirements for a coil coated aluminum sheet for exterior hardware applications. The coatin systems indicated consist of: a) a urethane primer, a fluor& color coat and, where indicated, a compatible fluon>carbon or urethane clear coat or, b) a oprietary...
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. This procedure defines the requirements an aluminum producer or processor...
1.1 This specification covers aluminum-coated steel sheet in coils and cut lengths available with two types of aluminum coating applied by the hot-dip process, with several coating weights [masses]. 1.2 Product furnished under this specification shall conform to the applicable...
1.1 This specification covers aluminum-coated steel sheet in coils and cut lengths available with two types of aluminum coating applied by the hot-dip process, with several coating weights [masses]. 1.2 Product furnished under this specification shall conform to the applicable...
Material Description. This standard defines the requirements for Aluminum Welded Blanks (AWB) used by GM in the manufacture of stamped sheet aluminum parts. It applies only to the as-supplied condition of welded blanks. Symbols. Not applicable. Applicability. Typical...
1.1 This specification covers aluminum-coated steel sheet in coils and cut lengths available with two types of aluminum coating applied by the hot-dip process, with several coating weights [masses]. 1.2 Product furnished under this specification shall conform to the applicable...
1.1 This specification covers 55?% aluminum-zinc alloy-coated steel sheet in coils and cut lengths available in two types of aluminum-zinc alloy coating applied by the hot-dip process with several coating weights [masses]. Type 1 is Al-Zn-Si alloy-coated, and Type 2 is...
1.1 This specification covers zinc-aluminum-magnesium alloy-coated steel sheet in coils and cut lengths. 1.2 This product is intended for applications requiring corrosion resistance and paintability. 1.3 The steel sheet is produced in a number of designations, types, grades,...
This specification covers an aluminum alloy in the form of sheet and plate 0.006 to 3.000 inches (0.15 to 76.20 mm), inclusive, in nominal thickness (see 8.5 ).
1.1 This specification covers 55?% aluminum-zinc alloy-coated steel sheet in coils and cut lengths available in two types of aluminum-zinc alloy coating applied by the hot-dip process with several coating weights [masses]. Type 1 is Al-Zn-Si alloy-coated, and Type 2 is...
This standard covers the requirements for wrought aluminum alloy sheet for exposed and unexposed body and closure panel applications. This specification is applicable to two types of wrought aluminum alloys; age hardenable and non-age hardenable. Age hardenable (e.g., 6000...
1.1 This specification covers zinc-aluminum-magnesium alloy-coated steel sheet in coils and cut lengths. 1.2 This product is intended for applications requiring corrosion resistance and paintability. 1.3 The steel sheet is produced in a number of designations, types, grades,...
Narrow Your Results