loading
MIL-PRF-87819 - HEADSET-MICROPHONE, (HEARING PROTECTIVE TYPE, HIGH AND MODERATE AMBIENT NOISE LEVELS), GENERAL SPECIFICATION FOR
December 21, 2020 - NPFC

Scope. This specification covers the requirements for headset-microphones with rigid headband. These parts meet established requirements for communications equipment used to protect against hazardous noise exposure and are approved for use in certain high and moderate ambient...

QPL-87819 - Headset-Microphone, (Hearing Protective Type, High and Moderate Ambient Noise Levels), General Specification for
May 5, 2020 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-87819 Headset-Microphone, (Hearing Protective Type, High and Moderate Ambient Noise Levels), General Specification for This list has been prepared for use by or for the Government in the...

MIL-PRF-87819/8 - HEADSET-MICROPHONE, HEARING PROTECTIVE TYPE HIGH AMBIENT NOISE LEVELS, F-35 FLIGHT DECK M87819/8
December 21, 2020 - NPFC

Headset-microphone PIN M87819/8 is a high ambient noise level headset-microphone designed for use by F-35 flight deck personnel to provide communication under the extreme noise conditions encountered in close proximity to F-35 and other fighter, transport, and tanker aircraft engines, on the flight...

SSPC AMBIENT CONDITIONS - MONITORING AND CONTROLLING AMBIENT CONDITIONS DURING COATING OPERATIONS
November 1, 2004 - SSPC

Introduction The locally prevailing air temperature, the moisture content in the air (% relative humidity), and the temperature at which moisture will condense on surfaces (dew point) are commonly called the ambient conditions. If these conditions are not within the ranges required by a...

AIHA NOISE & HEARING - THE NOISE MANUAL
AIHA
A description is not available for this item.
NOISE-VIBRATION PROBLEM - NOISE-VIBRATION PROBLEM-SOLUTION WORKBOOK
AIHA
A description is not available for this item.
ANSI/ASA S12.72 - American National Standard Procedure for Measuring the Ambient Noise Level in a Room
January 1, 2015 - ASA

This standard specifies requirements and procedures for the measurement of sound pressure levels in building spaces or rooms. These requirements and procedures apply ideally to measurements performed in unoccupied spaces, with normal building services and HVAC equipment operating under...

ANSI/ASA S3.1 - AMERICAN NATIONAL STANDARD Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms
August 3, 1999 - ASA

Hearing measurements in an audiometric test room may be conducted for different audiometric purposes over different test frequency ranges. However, if the ambient noise level is excessively high, some hearing threshold levels measured in that environment will be...

ASA 99 - MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS
ASA
A description is not available for this item.
ASTM E1419/E1419M-26 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
May 1, 2026 - ASTM International

1.1 This practice provides guidelines for acoustic emission (AE) examinations of seamless pressure vessels (tubes) of the type used for distribution or storage of industrial gases. 1.2 This practice requires pressurization to a level greater than normal use. Pressurization medium may be gas...

ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

1.1 In harmony with the Joint Committee for Guides in Metrology (JCGM) and detection concepts of the International Union of Pure and Applied Chemistry (IUPAC) (1, 2), this test method uses a series of replicated measurements of an analyte at dosage levels giving instrumental responses that...

ASTM D6639-25 - Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Investigations
July 1, 2025 - ASTM International

5.1 Concepts: 5.1.1 This guide summarizes the equipment, field procedures and interpretation methods used for the investigation of subsurface materials and geological structure as based on their properties to conduct, enhance or obstruct the flow of electrical currents induced in the ground by an...

ASTM E1124-10(2024) - Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
October 1, 2024 - ASTM International

1.1 This test method covers the field, or in situ measurement of sound power level by the two-surface method. The test method is designed to minimize the effects of reverberant conditions, directivity of the noise source under consideration, and the effects of ambient...

ASTM E2459-24 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
October 1, 2024 - ASTM International

5.1 All noise control features associated with the inlet or exhaust of large industrial fans and gas turbines are, or should be, based upon inlet or exhaust sound power levels in octave bands of frequency. Sound power levels are not directly measurable, however, so they must be...

Advertisement