loading
SMACNA SHEET METAL WRK CD - Standard Practice in Sheet Metal Work
January 1, 2012 - SMACNA
A description is not available for this item.
ASTM SHEETMETAL - Mechanics Modeling of Sheet Metal Forming
January 1, 2007 - ASTM

Preface Beverage cans and many parts in aircraft, appliances, and automobiles are made of thin sheet metals formed by stamping operations at room temperature. Thus, sheet metal forming processes play an important role in mass production. Conventionally, the forming process and tool...

SMACNA SHEET METAL WELD - SHEET METAL WELDING GUIDE
January 1, 2007 - SMACNA

INTRODUCTION BACKGROUND The Sheet Metal and Air Conditioning Contractors' National Association, Inc. (SMACNA) has found that joining metal by welding is one of the most labor−intense operations in the sheet metal industry. Predicting and controlling the costs and quality of welding is...

ICBO SHEET STEEL - ANSI/AWS D1.3-98, STRUCTURAL WELDING CODE-SHEET STEEL
ICBO
A description is not available for this item.
Energy and Mass Transfers: Balance Sheet Approach and Basic Concepts, Volume 1
September 1, 2018 - WILEY

"This is the first book of a series aiming at setting the basics for energy engineering. This book presents the fundamentals of heat and mass transfer with a stepbystep approach, based on material and energy balances. While the topic of heat and mass transfer is an old subject, the way the...

ASTM F2075-26 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
June 1, 2026 - ASTM International

1.1 This specification establishes minimum characteristics for those factors that determine particle size, consistency, purity, and ability to drain. 1.2 Engineered wood fiber that meets the requirements of this specification must comply with Specification F1292, if the surface is in the use zone...

ASTM A918-25 - Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
October 1, 2025 - ASTM International

1.1 This specification covers zinc-nickel alloy coatings applied by the electrolytic process to hot-rolled and cold-rolled steel sheet. The coating has a smooth, spangle-free surface. The zinc-nickel-coated sheet covered in this specification is produced in a range of coating masses...

ASTM D6913/D6913M-17(2025) - Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
October 1, 2025 - ASTM International

1.1 Soils consist of particles with various shapes and sizes. This test method is used to separate particles into size ranges and to determine quantitatively the mass of particles in each range. These data are combined to determine the particle-size distribution (gradation). This test method uses a...

API STD 610 DATA SHEET - Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
January 1, 2021 - API
A description is not available for this item.
ASTM E252-24 - Standard Test Method for Thickness of Foil and Thin Sheet by Mass Measurement
May 15, 2024 - ASTM International

1.1 This test method covers the determination of the thickness of metallic foil and sheet 0.015 in. (0.38 mm) and less in thickness by measuring the mass of a specimen of known area and density. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in...

DIN 15313 - Lifts; terminal boards, balancing sheets for guide rails
August 1, 1953 - DIN
A description is not available for this item.
AABC TOTAL SYSTEM BALANCE - National Standards For Total System Balance
January 1, 2016 - AABC
A description is not available for this item.
API RP 19G10 DATA SHEET - Design and Operation of Intermittent Gas-lift Systems - Data Sheets
September 1, 2018 - API
A description is not available for this item.
ASTM C1774-24 - Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
March 15, 2024 - ASTM International

5.1 A key aspect in understanding the thermal performance of cryogenic insulation systems is to perform tests under representative and reproducible conditions, simulating the way that the materials are actually put together and used in service. Therefore, a large temperature differential across the...

Advertisement