loading
AABC TOTAL SYSTEM BALANCE - National Standards For Total System Balance
January 1, 2016 - AABC
A description is not available for this item.
AABC TEST & BALANCE - Test and Balance Procedures
AABC
A description is not available for this item.
ASTM F498-19(2026) - Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
July 1, 2026 - ASTM International

1.1 This test method covers the determination of center spring constant, forebody spring constant, and afterbody spring constant of Alpine skis. In addition, it covers a method for determination of the spring constant balance. 1.2 This standard does not purport to address all of the safety...

ASTM B777-15(2026) - Standard Specification for Tungsten Base, High-Density Metal
July 1, 2026 - ASTM International

This specification establishes the requirements for four classes of machinable, high-density tungsten base metal produced by consolidating metal powder mixtures, the composition of which is mainly tungsten. This material specification may be used for bare parts or for parts that may be coated with...

ASTM C1679-26 - Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
June 1, 2026 - ASTM International

5.1 Thermal power curves are used to evaluate the isothermal hydration kinetics of the combined mixture of different materials during the early period after being mixed with water. These isothermal power curves, or hydration profiles, may provide indications relative to setting characteristics,...

ASTM F2075-26 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
June 1, 2026 - ASTM International

This specification covers engineered wood fiber for use as a playground safety surface under and around playground equipment. This specification establishes minimum requirements for the factors that determine particle size, consistency, purity, ability to drain, and heavy metal concentrations...

ASTM C1368-18(2026) - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
June 1, 2026 - ASTM International

4.1 For many structural ceramic components in service, their use is often limited by lifetimes that are controlled by a process of SCG. This test method provides the empirical parameters for appraising the relative SCG susceptibility of ceramic materials under specified environments. Furthermore,...

ASTM C1465-26 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
June 1, 2026 - ASTM International

4.1 For many structural ceramic components in service, their use is often limited by lifetimes that are controlled by a process of slow crack growth. This test method provides the empirical parameters for appraising the relative slow crack growth susceptibility of ceramic materials under specified...

ASTM F2879-22(2026) - Standard Specification for Eye Protective Devices for Airsoft Sports
May 1, 2026 - ASTM International

1.1 This specification applies to eye protective devices (EPDs) designed for use by participants in the sport of airsoft with 6-mm airsoft projectiles. These EPDs are designed to minimize or significantly reduce injury to the eye and adnexa as a result of impact and penetration of airsoft...

ASTM A890/A890M-26 - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
April 1, 2026 - ASTM International

1.1 This specification covers a group of cast duplex stainless steels (austenitic/ferritic). 1.2 The duplex stainless steel alloys offer a combination of enhanced mechanical properties and corrosion resistance when properly balanced in composition and properly heat treated. Ferrite levels are not...

ASTM E74-18(2026) - Standard Practices for Calibration and Verification for Force-Measuring Instruments
April 1, 2026 - ASTM International

1.1 The purpose of these practices is to specify procedures for the calibration of force-measuring instruments. Procedures are included for the following types of instruments: 1.1.1 Elastic force-measuring instruments, and 1.1.2 Force-multiplying systems, such as balances and small platform...

ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

5.1 Commercial trace detectors are used by first responders, security screeners, the military, and law enforcement to detect and identify explosive threats and drugs of interest quickly. These trace detectors typically operate by detecting chemical agents in residues and particles sampled from...

ASTM D7404-25 - Standard Test Method for Determination of Emulsified Asphalt Binder Residue by Moisture Balance Analyzer
December 1, 2025 - ASTM International

1.1 This test method covers a rapid and quantitative determination of the residue in emulsified asphalt binder using a moisture balance analyzer. It is applicable to all nonsolvent-containing emulsion types. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 Since a...

ASTM A986/A986M-01(2026) - Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
February 1, 2026 - ASTM International

This test method covers the procedures for the standard practice of performing magnetic particle examination of continuous grain flow crankshaft forgings intended for medium speed diesel engines. Crankshafts shall be divided into four zones of decreasing operational stress, each of which have been...

ASTM F2245-26 - Standard Specification for Design and Performance of a Light Sport Airplane
January 1, 2026 - ASTM International

This specification covers airworthiness requirements for the design of powered fixed wing light sport aircraft, an "airplane." In order to comply with flight requirements, the following shall be evaluated: load distribution limit, propeller speed and pitch limit, stalling speed, takeoff, climb,...

ASTM D7400/D7400M-26 - Standard Test Methods for Downhole Seismic Testing
February 15, 2026 - ASTM International

1.1 These test methods address compression (P) and shear (S) waves propagating in the downward direction in a nearly vertical plane. The seismic waves can be denoted as PV or PZ for a downward propagating compression wave and as SVH or SZX for downward propagating and horizontally polarized shear...

ASTM E2565-21(2026) - Standard Guide for Consensus-Based Process for an Occupational Safety and Health Standard That Includes an Occupational Exposure Guideline
January 1, 2026 - ASTM International

1.1 This guide presents a framework for a stakeholder-focused, consensus-based decision-making process for occupational safety and health standard development activities that include adoption or development of occupational exposure guidelines (OEGs) as a part of occupational health and safety...

ASTM D2850-26 - Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
January 1, 2026 - ASTM International

1.1 This test method provides data for determining undrained strength properties and stress-strain relations for cohesive soils. This test method provides for the measurement of the total stresses applied to the specimen, that is, the stresses are not corrected for pore-water pressure. 1.2 This...

ASTM E3057-26 - Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
January 1, 2026 - ASTM International

5.1 Need for Heat Flux Measurements: 5.1.1 Independent measurements of temperature and heat flux support the development and validation of engineering models of fires and other high environments, such as furnaces. For tests of fire protection materials and structural assemblies, temperature and...

ASTM E2715-17(2025) - Standard Practice for Moveable Property Storage
December 1, 2025 - ASTM International

1.1 This practice defines the physical protection and control of moveable property in storage locations. 1.2 Generally, organizations should establish and maintain control of moveable property through means of storage in a manner that will strike a balance between cost of storage and the...

Advertisement