1.1 This test method covers the determination of hydrocarbon types of total aromatics, total olefins, and total saturates in petroleum fractions that distill below 315?°C. Samples containing dark-colored components that interfere in reading the chromatographic bands cannot be analyzed. Note...
1.1 This test method provides a procedure for measuring the electromagnetic (EM) shielding effectiveness (SE) of a planar material for a plane, far-field EM wave. From the measured data, near-field SE values can be calculated for magnetic (H) sources for electrically thin specimens., Electric (E)...
5.1 The methods described represent the preferable means for calibration of field radiometers employing standard reference radiometers. Other methods involve the employment of an optical bench and essentially a point source of artificial light. While these methods are useful for cosine and azimuth...
1.1 This test method covers the use of a direct imaging analyzer to count and measure the size of dispersed solid particles per milliliter in light and middle distillate fuels in the size bands of =4?μm, =6?μm, and =14?μm. 1.2 The values stated in SI units are to be regarded as standard. No...
1.1 This practice provides tables of dimensions of preformed pipe insulation that shall be used in fabricating insulation covers for use on valves, ells, tees, flanges, and vessels in the pressure range from 150 to 1500 psi (1 to 10 MPa). These tables, which are part of this standard, are published...
2.1 A gas sample from above the insulating liquid in transformers and other electrical power apparatus can be used to give an early indication of developing fault conditions. Combustible gases are formed from the breakdown of the insulating materials under thermal and electrical stress. Excessive...
1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of infant garments with swaddling feature(s) and wearable sleep products worn over daywear or sleepwear as a bedding substitute, intended for infants and toddlers...
1.1 This specification covers external sealing bands to be used in conjunction with concrete pipe as defined in Terminology C822 and conforming to Specifications C14, C76, C412, C478/C478M, C506, C507, C655, C985, C1417, and C1433. 1.1.1 Type I, Rubber and Mastic Bands. 1.1.2 Type II,...
This specification covers commercial microwave ovens. These ovens use ultrahigh frequency electromagnetic radiation in the approved industrial, scientific, and medical bands to defrost, heat, and cook food. The microwave ovens are classified by types, sizes, groups, styles, and classes. In...
1.1 This practice is for supplemental identification labels assigned by an entity and affixed to equipment to permit control. 1.2 Identifying labels include, but are not limited to, removable and non-removable tags, bands, and plates featuring a means of identification such as alphanumeric...
1.1 This test method covers the determination of hydrocarbon types of total aromatics, total olefins, and total saturates in petroleum fractions that distill below 315?°C. Samples containing dark-colored components that interfere in reading the chromatographic bands cannot be analyzed. Note...
4.1 Full-encirclement-ty
This specification covers the standard requirements for corrugated, metallic-coated steel pipes intended for use in sewers, storm water drainage, underdrains, culverts construction, and similar other uses. These pipes are not normally used for the conveyance of sanitary or industrial wastes. This...
5.1 This procedure can be used for a variety of applications, including identifying unlabeled material, process control, raw material acceptance, product evaluation, and compositional change during environmental testing. 5.2 Rubber chemicals vary widely in their chemical and physical properties....
1.1 This practice covers a guide for the multivariate calibration of infrared (IR) spectrophotometers and Raman spectrometers used in determining the physical, chemical, and performance properties of petroleum products, liquid fuels including biofuels, and lubricants. This practice is applicable to...
This specification covers a system of color coding of reusable laboratory pipets for identification of nominal capacities and units of sub-division. This specification applies to one-mark and graduated pipets of nominal capacities. The color code and marking requirements for one-mark and graduated...
1.1 This test method covers the laboratory measurement of impact sound transmission of floor-ceiling assemblies using a standardized tapping machine. It is assumed that the test specimen constitutes the primary sound transmission path into a receiving room located directly below and that a good...
Narrow Your Results