FOREWORD Increased emphasis on water resources and on water conservation has had a direct effect on the petroleum industry as well as on all other industries which require large volumes of water in their operations. The petroleum industry has become extremely water conscious because in some areas...
5.1 This test method is performance oriented for determining if, and to what degree, different liquids create biological activity on geotextile filters thereby reducing their flow capability. The use of the method is primarily oriented toward landfill leachates but can be performed with any...
5.1 This test method is useful for the determination of element concentrations in many natural waters, metallurgical process solutions, mine impacted waters, wastewaters, biological materials, soil, and geochemical samples. It has the capability for the determination of up to 72 elements....
5.1 The modular bore and cone interfaces of total joint prostheses are subjected to loads that could result in micromotion and fretting corrosion at the bore and cone taper interface. Release of ionic and particulate products of fretting corrosion could result in increased wear of the articulating...
1.1 This specification covers material requirements for unfabricated and fabricated forms of hydrated calcium sulfate intended for surgical implants. Fabricated forms may include pressed and cast surgical implants in various geometric shapes. The calcium sulfate hemihydrate in the unfabricated form...
4.1 This practice may be used to evaluate the microbial retentivity of any membrane filter used for liquid sterilization where validation is required in the manufacturing of pharmaceutical, biopharmaceutical, and biological products or their intermediates (where applicable). These processes...
3.1 Calcium phosphate coatings have been shown in animal and clinical studies to be biocompatible and to enhance the early attachment of bone to implant surfaces (see Refs. (1-5)). 3.2 It is believed that the form of calcium phosphate ceramic and its purity with respect to secondary crystalline...
5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...
4.1 A variety of irradiation processes use low-energy electron beam facilities to modify product characteristics. Dosimetry requirements, the number and frequency of measurements, and recordkeeping requirements will vary depending on the type and end use of the products being processed. Dosimetry...
5.1 Components of implanted medical devices can release ions, which may lead to adverse biological effects if released in sufficient quantities. Therefore, it may be necessary to characterize the ion release behavior over time to verify that a medical device or device components or both will...
5.1 The objective of this guide is to recommend biological tests that can be used in addition to the testing recommended in Practice F748 for medical devices contacting the nervous system. This guide is primarily designed to evaluate neurotoxicity caused by medical devices that contact...
This specification covers electronic instruments intended for intermittent monitoring of patient temperatures. The temperature range of the instrument shall display temperature within the specific range requirement and regards to its accuracy, no individual reading shall be in error by more than...
4.1 This guide is designed to assist medical device manufacturers as they develop new devices or qualify existing devices (e.g., catheters, needles) for delivering clinical cell therapies (ISO 23033). Cytocompatibility considers the impact of the delivery device on the cells passing through the...
4.1 The main use is to immobilize, support, or suspend living cells or tissue in a matrix. The use of an encapsulation/immobi
1.1 This practice covers the manner in which the various results of examination and analysis to determine the composition of deposits formed from water for subsurface injection are to be reported. 1.2 All analyses shall be made in accordance with the test methods of ASTM, unless otherwise specified...
1.1 This test method covers the determination of the degree and rate of anaerobic biodegradation of plastic materials in high-solids anaerobic conditions. The test materials are exposed to a methanogenic inoculum derived from anaerobic digesters operating only on pretreated household waste. The...
3.1 The frequency of use of ECM products has gradually increased in the 21st century, as has the range of available products and applications as well as the opportunity for variable patient outcomes across these factors. Patient outcomes may be affected by multiple attributes, both related to a...
4.1 These practices should be used only to collect visible samples that are suspected biological agents and toxins and have been field screened as defined by the FBI-DHS-HHS/CDC Coordinated Document for explosive hazard, radiological hazard, and other acute chemical hazards. 4.2 These...
Narrow Your Results